9
Select Treatment: Press the selection
button until the correct treatment
number is lit Figure 3
)
.
Activate Galvanic Current: Your fingers
must be touching the chrome panel on the
back of the device while the conductor
touches your skin. We recommend you
thoroughly wet your hands with water or NaPCA Moisture Mist
to improve conductivity.
*
If your fingers slip o the chrome panel
during treatment, don
’
t worry—just adjust your hold on the device
and resume your spa treatment.
* Remember, the skin touching both chrome contact points must
be moist to successfully conduct galvanic currents.
During Treatment: The device will beep every 10 seconds to
indicate the unit is on and working. When 30 seconds remain
in a treatment, the device will beep every five seconds until the
treatment is complete.
Treatment Interruption: You must keep
the conductor in contact with the area
being treated and keep all contact points
moist
Figure 4
)
. If you break contact on
the chrome panel or the treatment head,
the display will flash on and o. The device
will shut o after a couple minutes of
non-use.
Treatment Completion: At the end of your treatment, the
device will emit a long beep followed by two short beeps and
automatically turn o. If you
’
d like to perform another treatment,
press the selection button to scroll to the next treatment number.
To turn the device o at any time, simply press the selection
button until the display goes blank.
Discontinue use if you experience swelling, redness, or a
skin reaction.
Figure 3
Figure 4