Toshiba - Scan a Book - How to Steps:
(The
preferred method is to copy a book, make sure it is correct then scan it to a file & save to network, jump drive or send as attachment via email.)
1. Small Books - Place book, face down, far left side & top of glass. It will
automatically adjust the increase in size.
2. Medium Books - Place book, face down, far left side & top of glass.
3. Large Book - Place the book, face down, to far left corner & left side of
glass. It will automatically adjust the decrease to fit regular sized paper.
This is for books that fit the entire copier window when opened.
4. Log into the printer/copier. Press Scan on keypad.
5. Tap to choose location to save or send this file: Email or USB. You can
give the file a name by taping the File button. Tap OK.
6. If the machine wants it to print (medium or large books) on LD paper which
will require the ByPass tray. You will get Job Status flashing. See details
for Job Status under Frequently Asked Questions below. If you want it to
scan to regular sized paper, you want LT. Tap under Scan Settings, tap
Auto, then tap LT, and then tap OK.
7. Press Scan to start scan, pressing Scan for each page. Tap Job Finish when
done.
8. Press the Function Clear key once to start another function or twice to log
out.
Tip: To Scan in color, tap on Scan Settings and under the Color Mode, tap
Auto Color.
Remember this will make the file large in size. Also if you have a lot of pages to copy you might want to change the dpi to 100, under
Scan Settings, then Resolution as this would help with the size.