Owner’s Guide
BAY COLLECTION
Spa Information
My Spa:
Model Name:
Serial Number:
Date Installed:
Dealer’s Name:
Table of Contents
1.0 Important Hot tub Owner Information ........................................ 1
2.0 FCC Notice .................................................................................... 1
3.0 Important Safety Instructions for all Hot tub Owners............... 2
3.1 Entrapment Risk ............................................................................ 6
3.2 Hyperthermia ................................................................................. 7
3.3 Warning Signs ............................................................................... 8
3.4 Important CSA safety instructions (Canada only) .......................... 8
4.0 Choosing a Location.................................................................... 9
4.1 Outdoor Location ........................................................................... 9
4.2 Indoor Location ............................................................................ 10
5.0 General Electrical Safety Instructions ..................................... 11
6.0 Electrical Installation Instructions ........................................... 12
7.0 Power Requirements ................................................................. 15
7.1 North American 240V 60Hz Models............................................. 15
7.2 Export 230V 50Hz Models ........................................................... 15
8.0 Hot tub Fill Up Procedure .......................................................... 15
9.0 Hot tub Features......................................................................... 20
10.0 Start-up ....................................................................................... 21
10.1 Start-up Sequence ....................................................................... 21
10.2 D1 SmartHUB™ Touch Control ................................................... 21
11.0 Operating Instructions............................................................... 23
11.1 D1 SmartHUB™ Touch Control ................................................... 23
11.2 Activating the Jets Pumps ........................................................... 23
11.3 Lights Menu ................................................................................. 24
11.4 Music Menu ................................................................................. 25
11.5 Turning the Stereo ON ................................................................. 26
11.6 Audio Settings Submenu ............................................................. 26
11.7 Source Menu ............................................................................... 26
11.8 Bluetooth® Pairing Instructions ................................................... 27
11.9 Adjusting Jet Flow........................................................................ 27
11.10 Fountain Control .......................................................................... 27
11.11 Underwater Magnetic Switches ................................................... 27
11.12 Jet Therapy Pillow™ .................................................................... 27
11.13 Selecting the Desired Massage Action ........................................ 28
11.14 Status Light .................................................................................. 28
11.15 Dynamic Massage Sequencer™ ................................................. 28
11.16 Operating the Dynamic Massage Sequencer .............................. 29
12.0 Programming Instructions ........................................................ 30
12.1 Water Care .................................................................................. 31
12.2 Maintenance Menu ...................................................................... 33
12.3 Date & Time Menu ....................................................................... 34
12.4 Keypad Menu............................................................................... 35
12.5 ElectricalCongurationMenu ...................................................... 36
12.6 Wi-Fi Menu (Optional) .................................................................. 36
12.7 Miscellaneous Menu .................................................................... 37
12.8 About Menu ................................................................................. 37
13.0 Hot tub Maintenance .................................................................. 38
13.1 Cleaningthelters ....................................................................... 38
13.2 Surface Care................................................................................ 40
13.3 Maintaining the Hot Tub Cabinet ................................................. 40
13.4 Pillow Care................................................................................... 41
13.5 Draining ....................................................................................... 41
13.6 Winterizing ................................................................................... 41
13.7 Special Cold Weather Instructions ............................................... 41
13.8 Maintaining the Cover .................................................................. 42
13.9 Restarting Your Hot Tub in Cold Weather .................................... 43
14.0 Water Quality Maintenance ....................................................... 43
14.1 UltraPure™ Plus .......................................................................... 43
14.2 pH Control.................................................................................... 44
14.3 Sanitizing ..................................................................................... 44
14.4 Other Additives ............................................................................ 45
15.0 Protective Conditions/Error Messages .................................... 45
16.0 Stereo Cautions ......................................................................... 47
Page 1
BAY Collection
1.0 Important Hot tub Owner Information
Your hot tub is constructed to the highest standards and is capable of
providing many years of trouble-free use. However, because heat reten-
tivematerialsareutilizedtoinsulatethehottubforefcientoperation,an
uncoveredhottubsurfaceandwallttingsdirectlyexposedtosunlightand
high temperatures for an extended period are subject to permanent dam-
age or discoloration. Damage caused by exposing the hot tub to this abuse
is not covered under warranty. We recommend that you always keep the
hot tub full of water when it is exposed to direct sunlight and that you keep
the insulating cover in place at all times when the hot tub is not in use.
Read and carefully follow the requirements for your hot tub’s support base
found in the Section 4.0 titled, “Choosing a Location” (page 9).
2.0 FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Rearrange or relocate the receiving antenna;
2. Increase the separation between the equipment and receiver;
3. Connect the equipment into an outlet on a circuit different from the
circuit connected;
4. Consult the dealer or an experienced radio/TV technician for help.
(Changesormodicationsnotexpresslyapprovedbytheparty
responsible for FCC compliance could void the user’s authority to
operate this equipment.)
Page 2
BAY Collection
3.0 IMPORTANT SAFETY INSTRUCTIONS
FOR ALL HOT TUB OWNERS
READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY!
Thishottubwasmanufacturedtomeetthestandardsandspecications
outlined in the “Virginia Graeme Baker Pool and Spa Safety Act”
(VGB Safety Act). When installing and using this hot tub, basic safety
precautions should always be followed, including:
1.
!
DANGER: RISK OF SEVERE INJURY OR DROWNING!
• Extreme caution must be exercised to prevent unauthorized access
by children.
• To avoid accidents, ensure that children do not use this hot tub
unless supervised at all times. Adult supervision is a critical safety
factor in preventing children from drowning.
• Use the straps and clip tie downs to secure the hot tub cover when
not in use. This will help discourage unsupervised children from
entering the hot tub. Keep the hot tub cover secure in high-wind
conditions.
• There is no representation that the cover, clip tie-downs, or actual
locks will prevent access to the hot tub.
2.
!
DANGER: RISK OF SEVERE INJURY OR DROWNING!
• Keep hair, loose articles of clothing or hanging jewelry away from
suctionttings,rotatingjetsorothermovingcomponentstoavoid
entrapment that could lead to drowning or severe injury.
• Neverusethehottubunlessallsuctionguards,lter,lterlid,
or skimmer assembly are installed to prevent body and/or hair
entrapment.
• Neveroperateorusethehottubifthelter,lterlid,orskimmer
assembly are broken or any part of the skimmer assembly is missing.
Please contact your dealer or nearest service center for service.
• Thesuctionttingsandsuctioncoversinthishottubaresized
tomatchthespecicwaterowcreatedbythepump(s).Ifitis
necessarytoreplacethesuctionttings,suctioncoversorpump(s),
besurethattheowratesarecompatibleandareincompliancewith
the VGB Safety Act.
• Neverreplaceasuctionttingorsuctioncoverwithoneratedless
thantheowratemarkedontheoriginalsuctiontting.Usingimproper
suctionttingsorsuctioncoverscancreateabodyorhairsuction
entrapment hazard that may lead to drowning or severe injury.
3.
!
DANGER: RISK OF SEVERE INJURY FROM ELECTRIC
SHOCK OR DEATH FROM ELECTROCUTION!
• Install the hot tub at least 5 feet (1.5m), from all metal surfaces.
As an alternative, a hot tub may be installed within 5 feet of metal
Page 3
BAY Collection
surfaces if each metal surface is permanently connected (bonded)
by a minimum No. 8 AWG (8.4 mm²) solid copper conductor attached
to the wire connector on the grounding lug, inside the equipment
compartment on the equipment box.
• A grounding wire connector is provided on this unit to connect a
minimum No. 8 AWG (8.4 mm²) solid copper conductor between
this unit and any metal equipment, metal enclosures of electrical
equipment, metal water pipe, or conduit within 5 feet (1.5m) of the unit.
• Never permit any electrical appliance, such as a light, telephone,
radio, television, etc. within 5 feet (1.5m) of a hot tub unless such
appliances are built-in by the manufacturer.
• Never bring any electrical appliances into or near the hot tub.
• Never operate any electrical appliances from inside the hot tub or
when you are wet.
• The electrical supply for this product must include a suitably rated
switch or circuit breaker to open all ungrounded supply conductors
to comply with Section 422-20 of the National Electrical Code/USA,
ANSI/NFPA 70. The disconnecting means must be readily accessible
and visible to the hot tub occupant but installed at least 5 feet (1.5m),
from the hot tub.
• The electrical circuit supplied for the hot tub must include a suitable
ground fault circuit interrupter (GFCI) as required by NEC Article 680-42.
4.
!
WARNING: RISK OF SEVERE INJURY OR DEATH!
• Extreme caution must be exercised to prevent diving or jumping
into the hot tub or slipping and falling, which could result in
unconsciousness, drowning, or serious injury. Remember that wet
surfaces can be very slippery.
• Never stand, walk or sit on the top railing of the hot tub.
5.
!
WARNING: RISK OF HYPERTHERMIA (OVER-HEAT-
ING) CAUSING SEVERE INJURY, BURNS, WELTS OR DEATH!
• Water temperature in excess of 104°F (40°C) may be injurious to
your health.
• RefertoSection3.2Hyperthermiaforspeciccausesandsymptoms
of this condition.
• The water in the hot tub should never exceed 104°F (40°C).
Water temperatures between 100°F (38°C) and 104°F (40°C) are
considered safe for a healthy adult.
• Lower water temperatures are recommended for young children
(children are especially sensitive to hot water) and when hot tub use
may exceed 10 minutes.
• The Consumer Products Safety Commission/USA has stated that the
water temperature in a hot tub should not exceed 104°F (40°C).
• Always test the hot tub water temperature before entering the
hot tub. The user should measure the water temperature with an
accurate thermometer since the tolerance of water temperature-
regulating devices may vary as much as +/- 5°F (2°C).
Page 4
BAY Collection
6.
!
WARNING: RISK OF SEVERE INJURY OR DEATH!
• Since excessive water temperatures have a high potential for causing
fetal damage during the early months of pregnancy, if pregnant or
possibly pregnant, consult your physician before using a hot tub.
• Pregnant or possibly pregnant women should limit hot tub water
temperatures to 100°F (38°C).
• Persons suffering from obesity or a medical history of heart disease,
low or high blood pressure, circulatory system problems, diabetes,
infectiousdiseasesorimmunedeciencysyndromesshouldconsulta
physician before using a hot tub.
• Ifyouexperiencebreathingdifcultiesinassociationwithusingor
operating your hot tub, discontinue use and consult your physician.
• Persons using medication should consult a physician before using a
hot tub since some medication may induce drowsiness, while other
medication may affect heart rate, blood pressure, and circulation.
• Persons suffering from any condition requiring medical treatment, the
elderly, or infants should consult with a physician before using a hot
tub.
• The use of alcohol, drugs, or medication before or during hot tub use
may lead to unconsciousness with the possibility of drowning.
7.
!
WARNING: RISK OF SEVERE INJURY OR DEATH!
• Prolonged immersion in a hot tub may be injurious to your health.
• Observe a reasonable time limit when using the hot tub. Exposures at
higher temperatures can cause high body temperature (over-heating).
Symptoms may include dizziness, nausea, fainting, drowsiness, and
reduced awareness. These effects could possibly result in drowning or
serious injury.
• Never use a hot tub immediately following strenuous exercise. Enter
and exit the hot tub slowly. Wet surfaces can be slippery.
8.
!
WARNING: TO DECREASE RISK OF INFECTION OR
DISEASE!
• To reduce the risk of contracting a waterborne
illness (e.g. an infection,
bacteria or virus) and/or respiratory ailments
, maintain water chemistry
within the parameters listed on the inside cover of this manual and
consult with a licensed engineer regarding proper ventilation if installed
indoors or in an enclosed area.
• People with infectious diseases should not use a hot tub to avoid
water contamination, which could result in spreading infections to
others.
• Always shower before and after using your hot tub. Maintain water
chemistry in accordance with manufacturer’s instructions. Failure to
do so may result in contracting a waterborne
illness (e.g. an infection,
bacteria or virus).
Page 5
BAY Collection
9.
!
WARNING: Inadditiontomaintenanceofltersandwater
chemistry, proper ventilation is recommended to reduce the risk of
contracting a waterborne
illness (e.g. an infection, bacteria or virus)
and/or respiratory ailments
that could be present in the air or water.
Consult a licensed architect or building contractor to determine your
specicneedsifinstallingyourhottubindoors.
10. CAUTION: TO DECREASE RISK OF PRODUCT DAMAGE.
• Maintain water chemistry in accordance with manufacturer’s
instructions.
• Proper chemical maintenance of hot tub water is necessary to
maintain safe water and prevent possible damage to hot tub
components.
11.
!
WARNING: RISK OF SEVERE INJURY OR DEATH! The
appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of expe-
rience or knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
for their safety.
12. NOTE: This hot tub is not intended nor designed to be used in a
commercial or public application. The hot tub buyer shall determine
whether there are any code restrictions on the use or installation of
this hot tub since local code requirements vary from one locality to
another.
Hot Tub Safety Literature
To ensure you have a safe and enjoyable hot tub experience,
learn all you can about hot tub safety and emergency procedures.
Especially useful are the brochures listed below:
• Children Aren’t Waterproof
• Pool and Spa Emergency Procedures For Infants and Children
• Layers of Protection
• The Sensible Way to Enjoy Your Spa or Hot tub
The Association of Pool and Spa Professionals publishes these
brochures. To acquire a brochure:
• Ask your hot tub dealer (they may have copies)
• Go to http://apsp.org
• Conduct your own search on the internet
• Write to the following address:
The Association of Pool and Spa Professionals
2111 Eisenhower Avenue
Alexandria VA 22314
703.838.0083
Page 6
BAY Collection
3.1 Entrapment Risk
The Consumer Products Safety Commission/USA has reported that
users of pools and spas have become entrapped (stuck) to drain and/
orsuctionttingscausingdeath,drowning,orseriousinjury(see
diagram below). This hot tub was manufactured to meet the standards
andspecicationsoutlinedinthe“VirginiaGraemeBakerPoolandSpa
Safety Act” (VGB Safety Act). Entrapment risk can be minimized if proper
precautions are taken.
DANGER: RISK OF PERSONAL INJURY OR DEATH!
Neveroperatethehottubifasuctiontting,suctioncover,lter,
lterlidorskimmerassemblyarebroken,damagedormissing.
!
Note: Suction covers must be replaced every 7 years.
1.
!
DANGER: RISK OF SEVERE INJURY OR DROWNING!
Hair entrapment: May occur if hair is entangled, knotted or snagged
in a drain suction or skimmer assembly. This has been reported in
persons who when submerge themselves underwater, allowing hair
to come close and/or within the reach of the suction fittings, suction
covers or skimmer assembly.
• Keephairawayfromsuctionttings,suctioncovers,lter,lterlidor
skimmer assembly.
• Children are at risk for hair entrapment if swimming under water.
• Neverallowchildrentoplayorgetnearthesuctionttings,suction
covers,lter,lterlidorskimmerassembly.
2.
!
DANGER: RISK OF SEVERE INJURY OR DROWNING!
Limb entrapment: May occur when a limb becomes entrapped,
inserted or sucked into a suction or outlet opening.
• Alwayskeepsuctionttings,suctioncovers,lter,lterlidorskimmer
assembly in place when operating to avoid limb entrapment.
• Neverallowchildrentoplayorgetnearthesuctionttings,suction
covers,lter,lterlidorskimmerassembly.
Suction Fittings,
Suction Covers
(locations vary
by models)
Filter, Filter
Lid, Skimmer
Assembly
(location and
style vary by
models)
Page 7
BAY Collection
3.
!
DANGER: RISK OF SEVERE INJURY OR DROWNING!
Body entrapment: May occur when part of the torso becomes
entrapped, inserted or sucked into a suction or outlet opening.
• Neverallowchildrentoplayorgetnearthesuctionttings,suction
covers,lter,lterlidorskimmerassembly.
4.
!
DANGER: RISK OF SEVERE INJURY OR DROWNING!
Evisceration (disembowelment) entrapment: May occur when the
buttocks becomes entrapped, inserted or sucked into a suction or
outlet opening.
• Neversitonsuctionttings,suctioncovers,lter,lterlidorskimmer
assembly.
• Neverallowchildrentoplayorgetnearthesuctionttings,suction
covers,lter,lterlidorskimmerassembly.
5.
!
DANGER: RISK OF SEVERE INJURY OR DROWNING!
Mechanical entrapment: May occur when jewelry, swimsuit, or
hair accessories become entangled, knotted or snagged in a drain
suction or skimmer assembly.
• Never allow your jewelry, swimsuit, or hair accessories to come close
tothesuctionttings,suctioncoversorskimmerassembly.
• Neverallowchildrentoplayorgetnearthesuctionttings,suction
covers,lter,lterlidorskimmerassembly.
3.2 Hyperthermia
Prolonged immersion in hot water may induce hyperthermia (over-
heating). The use of alcohol or drugs can greatly increase the risk of fatal
hyperthermia in spas. A description of the causes, symptoms, and effects
of hyperthermia are as follows:
Hyperthermia occurs when the internal temperature of the body reaches
a level several degrees above the normal body temperature of 98.6°F
(37°C). The symptoms of hyperthermia include drowsiness, lethargy
(fatigue), and an increase in the internal temperature of the body (feeling
of being too hot). The effects of hyperthermia include:
• Unawareness of impending hazard;
• Failure to perceive heat;
• Failure to recognize the need to exit hot tub;
• Physical inability to exit hot tub;
• Fetal damage in pregnant women; and
• Unconsciousness and danger of drowning.
Page 8
BAY Collection
3.3 Warning Signs
Each hot tub has been provided with a Warning Sign and an Important
Notice label. This label outlines safety precautions. This sign should
be permanently placed in a location that is visible to the hot tub user.
Replacement signs can be obtained from:
3.4 IMPORTANT CSA SAFETY INSTRUC-
TIONS (CANADA ONLY)
When using this electrical equipment, basic safety precautions should
always be followed, including the following:
1. READ AND FOLLOW ALL
INSTRUCTIONS.
2. A green colored terminal or a terminal marked G, Gr, Ground,
Grounding or the symbol* is located inside the supply terminal box
or compartment. To reduce the risk of electric shock, this terminal
must be connected to the grounding means provided in the electric
supply service panel with a continuous copper wire equivalent in size
to the circuit conductors that supply this equipment. *IEC Publication
417, Symbol 5019.
3. At least two lugs marked “Bonding Lugs” are provided on the
external surface or on the inside of the supply terminal box/
compartment. To reduce the risk of electric shock, connect the local
common bonding grid in the area of the hot tub to these terminals
with an insulated or bare copper conductor not smaller than
No. 6 AWG (10 mm²).
4. Alleld-installedmetalcomponentssuchasrails,ladders,drains
or other similar hardware within 10 feet (3m) of the hot tub shall be
bonded to the equipment grounding buss with copper conductors not
smaller than No. 6 AWG (10 mm²).
5. SAVE THESE INSTRUCTIONS.
WARNING
DANGER
NO CLIMBING OR WALKING ON TOP RAIL
SHALLOW WATER
NO DIVING - NO JUMPING
DIVING OR JUMPING MAY
CAUSE DEATH, PARALYSIS OR
PERMANENT INJURY
HOW TO PREVENT DIVING/JUMPING ACCIDENTS
• This is a non-diving pool/Aquatic Fitness System.
• Do not dive or jump into this pool/Aquatic Fitness System under any circumstances.
• Do not utilize sliding equipment with this pool/Aquatic Fitness System.
• Do not utilize diving equipment with this pool/Aquatic Fitness System.
HOW TO PREVENT CHILD DROWNING ACCIDENTS
• Children must be constantly and closely supervised when using the pool/Aquatic Fitness
System.
• Children must not be allowed in the pool/Aquatic Fitness System area without an adult
being present.
• The pool/Aquatic Fitness System gate must be closed and locked when the pool/Aquatic
Fitness System is not being used.
• Portable ladders must be removed when not in use.
• Limited access ladders must be removed or latched in the raised position when not in use.
HOW TO PREVENT OTHER ACCIDENTS
• Do not swim alone.
• Do not use pool/Aquatic Fitness System if you have taken drugs or drunk alcohol.
• Non-swimmers must stay in the shallow end of the pool/Aquatic Fitness System.
EMERGENCY PHONE NUMBER
For additional information read the safety and usage information supplied in the Installer/Owner envelope.
FAILURE TO FOLLOW THESE RULES
MAY CAUSE DEATH, PARALYSIS OR PERMANENT INJURY
Page 9
BAY Collection
4.0 Choosing a Location
IMPORTANT: Because of the combined weight of the hot tub,
water and users, it is extremely important that the base upon which
thehottubrestsbesmooth,at,levelandcapableofuniformly
supporting this weight, without shifting or settling, for the entire time
the hot tub is in place. If the hot tub is placed on a surface, which
does not meet these requirements, damage to the skirt and/or the
hot tub shell may result. Damage caused by improper support is
not covered under warranty. It is the responsibility of the hot tub
owner to assure the integrity of the support at all times. We recom-
mend a poured, reinforced concrete slab with a minimum thickness
of 4 inches (10 cm). Wood decking is also acceptable provided it is
constructed so that it meets the requirements outlined above.
WARNING: For spas that are to rest on balconies, roofs
orotherplatformsnotspecicallytiedintomainstructural
support, consult a professional Structural Engineer with expe-
rience in this type of application.
!
The hot tub must be installed in such a manner as to provide drainage
away from it. Placing the hot tub in a depression without provisions
forproperdrainagecouldallowrain,overowandothercasualwater
tooodtheequipmentandcreateawetconditioninwhichitwould
sitin.Forspaswhichwillberecessedintoaoorordeck,installso
as to permit access to the equipment, either from above or below, for
servicing. Make certain that there are no obstructions, which would
prevent removal of all side cabinet side panels and access to the jet
components, especially on the side with the equipment bay.
CAUTION: If the hot tub is indoors or located in an enclosed area,
proper ventilation should be discussed with an Engineer or authority
competent enough to understand the necessary provisions needed
to vent moist or heated air and air associated with chemical odors
outdoors. When the hot tub is in use considerable amounts of
moisture will escape potentially causing mold and mildew. This
can cause health risk. Over time, this can damage certain surfaces,
surroundings, and equipment.
4.1 Outdoor Location
In selecting the ideal outdoor location for your hot tub, we suggest that
you take into consideration:
• The proximity to changing area and shelter (especially in colder
weather).
• The pathway to and from your hot tub (this should be free of debris
so that dirt and leaves are not easily tracked into the hot tub).
• The closeness to trees and shrubbery (remember that leaves and
birds could create extra work in keeping the hot tub clean).
!
Page 10
BAY Collection
• A sheltered environment (less wind and weather exposure can result
in lowered operation and maintenance costs).
• The overall enhancement of your environment. It is preferable not
to place the hot tub under an unguttered roof overhang since run-off
water will shorten the life expectancy of the hot tub cover.
• For spas that are to rest on balconies, roofs or other platforms not
specicallytiedintomainstructuralsupport,consultaprofessional
Structural Engineer with experience in this type of application.
• In the unlikely event that you should ever need to access or
gain entry to any portion of the hot tub for servicing, it is highly
recommended that you plan your outdoor installation to provide full
access to the entire hot tub. Please take this into consideration when
placing the hot tub in a deck or enclosed by a surrounding.
• Considerlocatingyourhottubawayfromanyreectivesurfaceor
glass to prevent any damage to the synthetic skirt.
• Do not shim the hot tub. To ensure proper support the hot tub must
sitatontheintendedfoundation.
4.2 Indoor Location
For indoor installations many factors need to be considered before
installing a hot tub indoors.
WARNING: Inadditiontomaintenanceofltersandwater
chemistry, proper ventilation is recommended to reduce the
risk of contracting a waterborne
illness (e.g. an infection, bac-
teria or virus) and/or respiratory ailments
that could be present
in the air or water. Consult a licensed architect or building
contractortodetermineyourspecicneedsifinstallingyour
hot tub indoors.
!
• Proper Foundation: Consult a Structural Engineer when
considering a foundation that will adequately support the hot
tub the entire time it is in place. Proper support is critical especially
if the hot tub is to rest on a second story or higher. For spas that
aretorestonbalconies,roofsorotherplatformsnotspecicallytied
into the main structural support, you should consult a professional
Structural Engineer with experience in this type of application.
• Proper Drainage: It is extremely important to have in place
measures to sufciently handle excessive water spillage. Be
suretheooringinwhichthehottubrestsonhasadequatedrainage
and can handle the entire contents of the hot tub. Be sure to make
provisions for ceilings and other structures that may be below the
spas installation. Areas around your hot tub can become wet or
moistsoallooringandsubsequentfurniture,wallsandadjacent
structures should be able to withstand or resist water and moisture.
Page 11
BAY Collection
• Proper Ventilation: Proper ventilation should be discussed with
an Engineer or authority competent enough to understand the
necessary provisions needed to vent moist or heated air and
air associated with chemical odors outdoors. When the hot tub
is in use considerable amounts of moisture will escape, potentially
causing mold and mildew over time, which can damage certain
surfaces and/or surroundings.
• Sufcient Access: In the unlikely event that you should ever need
to access or gain entry to any portion of the hot tub for servicing, it is
highly recommended that you plan your indoor installation to provide
full access to the entire hot tub.
• Warranty: Damage caused by not following these guidelines or any
improper installation not in accordance to local codes or authorities is
not covered under the spas warranty. Please consult your local state
or city building ordinances.
• Do not shim the hot tub. To ensure proper support the hot tub must
sitatontheintendedfoundation.
5.0 General Electrical Safety Instructions
Your new Dimension One hot tub is equipped with the D1
SmartHUB™ Touch Control
system. It contains the most
advanced safety and self-protective equipment in the industry.
Nonetheless, this hot tub must be installed properly to ensure
dependable usage. Please contact your local dealer or local building
department should you have any questions regarding your installation.
Proper grounding is extremely important. D1® spas are equipped with
a current collector system. A pressure wire connector is provided on
the surface of the control box to permit connection of a bonding wire
between this point and any ground metal equipment, metal water pipe
or conduit within 5 feet (1.5m) of the hot tub, or copper clad grounding
rod buried within 5 feet (1.5m) of the hot tub. Bonding wire must be at
least No. 8 AWG (8.4 mm²) solid copper wire. This is a most important
safety assurance feature. Before installing your hot tub, check with your
local building department to ensure installation conforms to local building
codes.
Page 12
BAY Collection
6.0 Electrical Installation Instructions
IMPORTANT NOTICE: The electrical wiring of this hot tub
must meet the requirements of the National Electrical Code/USA (NEC)
and any applicable state or local codes. The electrical circuit must be
installedbyaqualiedelectricianandapprovedbyalocalbuilding/
electrical inspection authority.
1.
!
DANGER: TO DECREASE THE RISK OF SHOCK,
PRODUCT DAMAGE OR ELECTRICAL FIRE.
This hot tub must be permanently connected (hard-wired) to the
power supply. No plug-in connections or extension cords are
to be used in conjunction with the operation of this hot tub.
Supplying power to the hot tub, which is not in accordance with these
instructions, will void both the independent testing agency listing and
the manufacturer’s warranty.
2. The power supplied to this hot tub must be a dedicated circuit with no
other appliances or lights sharing the power provided by the circuit.
3. To determine the current, voltage and wire size required, refer to
Section 7.0 “Power Requirements” (page 15)foryourspecichot
tub model.
• Wire size must be appropriate per NEC and/or local codes.
• We recommend type THHN wire. All wiring must be copper to ensure
proper connections. Do not use aluminum wire.
• When using wire larger than #6 (10 mm²), add a junction box near
the hot tub and reduce to short lengths of #6 (10 mm²) wire to
connect to the hot tub.
4. The electrical supply for this product must include a suitably rated
switch or circuit breaker to open all ungrounded supply conductors
to comply with Section 422-20 of the National Electrical Code/USA,
ANSI/NFPA 70. The disconnecting means must be readily accessible
to the hot tub’s occupant but installed at least 5 feet (1.5m) from hot
tub water.
5. The electrical supply for this product must include a suitably rated
isolating switch and circuit breaker to comply with local electrical
regulations. This RCD/GFCI circuit breaker must be installed at the
power supply in the house electrical box.
6. The electrical circuit supplied for the hot tub must include a suitable
ground fault circuit interrupter (GFCI) as required by NEC Article
680-42/USA.
7. The electrical circuit supplied for the hot tub must include a suitable
residual-current device (RCD) as required by local codes and
regulations.
8. For Europe, the hot tub should be supplied through a residual current
device (RCD) with a rated tripping current not exceeding 30mA (IEC
60335-2-60).
9. For Germany, the hot tub should be supplied through a residual
current device (RCD) with a rated tripping current not exceeding
10mA (IEC 60335-2-60).
Page 13
BAY Collection
10. To gain access to the hot tub’s power terminal block, you will need
to remove the center cabinet panel by removing the panel screws,
Figure 6.0.
11. Once you remove the panel screws, grab the sides of the panel and
gently pull the cabinet forward and then up to remove. Place the
panel in a safe location to prevent it from being damaged.
12. Then remove the door screws for the access door on the control box,
Figure 6.0a.
13. Now feed the electrical cable through to the terminal pipe ending at
the control box, Figure 6.0b.
14. Connect wires to the terminal block (Figures 6.0c-6.0d). ALL WIRES
MUST BE SECURELY CONNECTED or equipment damage could
result.
15. Install the control access box door and reinstall the cabinet panel(s).
Figure 6.0
Figure 6.0a
Conduit Line
Figure 6.0b
Page 14
BAY Collection
DOMESTIC
Figure 6.0c
240V 60Hz Wiring
GR
L1
N
L2
EXPORT
Figure 6.0d
230V 50Hz Wiring
PJ1 wire connects to:
P7 and P13
PJ2 wire connects to:
P10 and P74
PJ1 wire connects to:
P7 and P10
PJ2 wire connects to:
P13 and P74
PJ1 wire connects to:
P7 and P10
PJ2 wire connects to:
P11 and P13
L1
N
GR
P10
P13
P5
1-Phase Connection
P7
P15
P75P74
P14
P11
2-Phase Connection
L1
N
L2
P10
P13
P5
P7
P15
P75P74
P14
P11
GR
3-Phase Connection with Single Neutral
N
P10
P13
P5
P7
P15
P75P74
P14
P11
L1
L2
L3
GR
Page 15
BAY Collection
7.0 Power Requirements
7.1 North American 240V 60Hz Models
Model Power Branch Circuit
Circuit
Protection
Wire
Gauge
Bay Collection 240V 3 wires + Ground 40A or 50A #6 awg
7.2 Export 230V 50Hz Models
Model Power Circuit Protection
Bay Collection 230V
1 x 32A
2 x 16A
3 x 16A
8.0 Hot tub Fill Up Procedure
For best results, read each step in its entirety before proceeding with this
procedure. Make sure all drains are closed before you begin.
IMPORTANT NOTICE: Make sure to install the
drain hose bib, that is packaged in the warranty pack,
on to the hot tub. Securely screw in and close the drain
valve and drain cap.
1. Prepare The Hot tub For Filling
• Clear all debris from the hot tub. (Although the hot tub
shell has been polished at the factory, you may want to treat it with
a specially formulated hot tub cleaner.) Consult your authorized
DimensionOnedealerforadditionalinformationpriortollinghot
tub.
• RemovetheltersasillustratedinSection13.1
CAUTION: Do not leave the spa shell exposed to the sun during
thellingprocess.Leavingitexposedcouldresultinsurfacedam-
age and not covered under the warranty.
2. Fill Hot tub
• Place the end of your garden hose into one of the empty skimming
ltertting.Removebothoftheairbleedercapstoallowtheairto
escapeasthehottublls,page20. Fill hot tub half way, then
placethegardenhoseintotheoppositelterttingwhileaddingthe
remainingllwater.
Figure 8.0a
Page 16
BAY Collection
CAUTION: TO DECREASE BUILD UP ON COMPONENTS AND
MINIMIZE ACRYLIC DAMAGE. Neverllwithwaterfromawater
softener.Ifyourwaterisextremely“hard,”itispreferabletollhalf-
way with hard water and the rest of the way with softened water.
Water that is too soft can be corrosive to metal components.
•
!
WARNING: TO DECREASE RISK OF INFECTION OR
DISEASE.
Fill hot tub with clean tap water from garden hose, to reduce risk of
contracting a waterborne
illness (e.g. an infection, bacteria or virus)
and/or respiratory ailments
. Fill the spa until the water level is about
6" below the top of the spa. (DO NOT OVERFILL!).
IMPORTANT:Alwaysllyourhot tubthroughbothlterttings
after draining. Failure to do so may cause air to be trapped in the
pumps, preventing them from circulating water.
3. Turn On Power
Turnonpowertohottubatthehome’scircuitbreaker.Thelter
pumps will turn on for one minute each to blow out the plumbing
lines, page 21. Then the heater and circulation pump will
automatically activate. Activate Jets Pump 1 to prime the pump,
page 23. Let it run for about 10-15 seconds. Repeat this process
with all the pumps. Once, all the pumps are primed, cleared of
airlocks,andtherearenoowerrors,reinstalltheltercartridges
and close the air bleeder caps.
4. Add Start-Up Chemicals
Turn on the jet pumps when adding chemicals in order to circulate
the chemicals thoroughly. Add the hot tub water chemicals as
recommended by your authorized hot tub dealer. See Section titled
“Water Quality Maintenance” for general guidance.
WARNING: RISK OF POISONING OR DEATH.
Never leave chemicals opened and accessible to anyone. Use
chemicals according to the vendor’s instructions. Always store
chemicals in a safe and/or locked location. Keep away from
and out of reach of children.
!
5. Establish A Stable Sanitizer Reading
Establish a stable sanitizer reading of no less than 3.0-4.0 ppm free
chlorine or 2.0-4.0 ppm bromine. To ensure healthy water conditions,
always maintain a constant sanitizer reading within the levels
recommended by the Association of Pool and Spa Professionals. If
sanitizer levels cannot be stabilized, perform the decontamination
procedure steps 8-14 on the following page.
Page 17
BAY Collection
6. Set Hot tub To Heat
To warm hot tub water to a comfortable temperature, follow these
steps:
• The display on the control panel displays the actual temperature of
the hot tub water. Tap or to increase or decrease the water
temperature in 1 degree increments.
Note: The temperature range for the hot tub is 59 to 104°F (15 to 40°C).
7. Place Cover On Hot tub
• Keeping the insulating cover in place anytime the hot tub is not in
use will reduce the time required for heating, thereby minimizing
operating costs.
• The time required for initial heat-up will vary depending on the
starting water temperature.
• Align the cover on the spa and use the included hardware to
attached the cover locks to spa cabinet.
DANGER: RISK OF PERSONAL INJURY.
Check water temperature carefully before entering hot tub! Ex-
cessive water temperature can cause burns, welts and body
temperature to rise, hyperthermia (over-heating).
!
Decontamination Procedure
Steps 8-14 below are only required when sanitizer levels are unstable
after performing Hot Tub Fill Up Procedures steps 1-5. Disregard steps
8-14 if sanitizer levels remain stable after performing steps 1-5 above.
Note: The “Decontamination Procedure” should also be used after the
hot tub has been “Winterized” (page 41) or has been sitting without
power for an extended period.
8. Add 2.5 ounces of sodium dichlor for every 100 gallons of water.
Refertothetablebelowforapproximatewaterllvolumebymodel.
CAUTION: RISK OF PERSONAL INJURY OR HOT TUB
DAMAGE!
Never add chlorine tablets (trichlor) or acid to your hot tub for
any reason! These chemicals may damage components within
your hot tub, burn or irritate your skin, create a rash, and void
the manufacturer warranty for your hot tub.
!
Page 18
BAY Collection
Water Fill Volume by Model
Average Sodium
Model Fill Volume* Dichlor
Amore Bay .......................415 Gal (1,571 L) ................................ 10.4 oz
Lotus Bay.........................375 Gal (1,420 L) ................................ 9.4 oz
Sarena Bay ......................500 Gal (1,893 L) ................................ 12.5 oz
*Useaveragellvolumeforchemicalmaintenance
9. Leave hot tub cover open during this step to allow excessive
chemical vapors to exit hot tub, protecting pillows and plastic knobs
from chemical attack. If hot tub is indoors, open doors and windows
for proper ventilation. Turn on all hot tub jet pumps for 1 hour and
place all massage selector knob(s) in their center “combo” position.
Note: You will need to activate the jet pumps every 30 minutes since
these functions have an automatic 30-minute time-out that turns them off.
WARNING: RISK OF PERSONAL INJURY!
• To decrease the risk of injury, drowning or entrapment, nev-
er leave your hot tub unattended for any reason while the
cover is open and accessible, especially to small children
and animals!
• Use the hot tub straps and clip tie downs to secure the cover
when not in use. This will help to discourage unsupervised
children from entering the hot tub and keep the hot tub cover
secure in high wind conditions. There is no representation
that the cover, clip tie downs, or actual locks will prevent
access to the hot tub.
• Precautions should be taken to minimize your exposure
to chemical vapors (that could cause lung, brain, or skin
damage).
!
10. Turn off power to the hot tub at the circuit breaker, then drain tub as
outlined in Section 13.5.
11. Rellhottubwithcleantapwaterfromgardenhose. Fill the spa
until the water level is about 6” below the top of the spa. (DO NOT
OVERFILL!).
CAUTION: TO DECREASE BUILD UP ON COMPONENTS AND
MINIMIZE ACRYLIC DAMAGE.
Neverllwithwaterfromawatersoftener.Ifyourwaterisextremely
“hard,”itispreferabletollhalfwaywithhardwaterandtherestof
the way with softened water. Water that is too soft can be corrosive
to metal components.
Page 19
BAY Collection
12. Consult your authorized Dimension One Spas dealer for chemical
recommendations, then add chemicals to hot tub water to achieve
a constant sanitizer reading within the levels recommended on the
inside cover of this manual.
13. Turn on jet pumps when adding chemicals to ensure proper mixing
and leave your hot tub cover open until the sanitizer level becomes
stable to protect pillows and plastic knobs from chemical attack.
WARNING: RISK OF PERSONAL INJURY.
• To decrease the risk of injury, entrapment or drowning,
never leave your hot tub unattended for any reason while
the cover is open and accessible to small children and
animals!
• To decrease the possibility of contracting a waterborne
illness (e.g. an infection, bacteria or virus) and/or respirato-
ry ailments, maintain water chemistry within step 6 param-
eters. If you or other bathers experience such a condition,
discontinue use and seek medical attention.
!
14. Establish a sanitizer reading no less than 3.0-4.0 ppm free chlorine
or 2.0-4.0 ppm bromine, then allow the hot tub to set undisturbed for
8 hours. Retest water after 8 hours to determine if sanitizer levels
are stable. If sanitizer levels are stable, your hot tub is ready for
use. To ensure healthy water conditions, always maintain a constant
sanitizer reading within the levels recommended on the inside cover
of this manual. If sanitizer levels are not stable at this time, it will be
necessary to repeat this procedure in its entirety until stable sanitizer
readings are achieved.
IMPORTANT: Follow the waterchemistryparametersasdenedbythe
Association of Pool and Spa Professionals.
15. After adequate sanitizer levels are achieved, close all hot tub air
controls to maximize heat retention when hot tub is not in use.
Page 20
BAY Collection
9.0 Hot tub Features
Hot tub features and operations are subject to change without notice
Amore Bay Model Shown (features vary by model)
3
3
7
4
4
4
4
8
9
11
14
14
14
14
14
14
14
14
14
14
14
12
13
13
13
13
13
13
10
16
16
16
16 16
16
17
6
6
5
5
5
2
19
22
20
15
15
15
15
15
15
18
18
1
23
24
24
21
1. Control Panel
2. Massage Sequencer
3. Massage Selectors (2 ea.)
4. Cupholders (4 ea.)
5. Liquid FX™ Fountain (3 ea.)
6. Jet Therapy Pillows™
(2 ea.)
7. UltraPure™ Filter/Skimmer
8. Skimmer (Pump 1)
9. Fountain Diverter Valve
10. Fountain Control Valve
11. Main Light
12. Floor Drain
13. Suction Covers (6 ea.)
14. VCR Mini Storm Rotational Jets
(22 ea.)
15. VCR Mini Storm Directional Jets
(10 ea.)
16. VCR Euro Cluster Storm Dual
Rotational Jets (8 ea.)
17. VCR Euro Cluster Storm
Directional Jets (2 ea.)
18. VCR Power Storm Directional
Jets (3 ea.)
19. VCR Power Storm Rotational
Jets (2 ea.)
20. VCR Power Storm Dual Rota-
tional Jets (4 ea.)
21. VCR Power Storm Multi Port
Jets (2 ea.)
22. Typhoon Jet
23. Bullet Lens Lights (6 ea.)
24. Air Relief Valve (2 ea.)
Page 21
BAY Collection
10.0 Start-up
10.1 Start-up Sequence
During the start-up sequence, the initializing screen will appear showing
the software information, Figure 10.1a. The fountains will activate and
then a blow-out cycle will begin activating each Jets Pump for 1 minute
each. After the cycle ends, the hot tub will display the Home Menu, Sec-
tion 10.2.
10.2 D1 SmartHUB™ Touch Control
Your Dimension One Spas® hot tub is equipped with a state-of-the-art
LCD touch screen control panel. Access to all menus can be achieved
by using the touch screen. Programming features can be easily
programmed with our user-friendly design. With the ease of use, there
willmoretimetoenjoythebenetsofyourhottub.
A. Home Menu
The Home Menu, Figure 10.2a, provides access to hot tub functions and
programming. Operation is made easy by the interactive touch-screen
control panel. If there is no activity for 2 minutes, the display will time-
outintoasleepmode.Toreactivatethedisplay,justtapandbrieyhold
the display then drag the Dimension One Spas logo into the box, Figure
10.2b
NOTE: When a feature is on, the icon will be illuminated.
= Temperature Control: Allows you to adjust the set
temperature of the hot tub:
• Increase the temperature by tapping in 1° increments.
• Decrease the temperature by tapping in 1° increments.
Note: The temperature range for the hot tub is 59 to 104°F (15 to 40°C).
When the hot tub is heating a message will appear on the Home Menu.
Initializing...
© 2015, rev. 19.06
Build: Nov 28, 2016, 11:29:00
Figure 10.1a
Drag icon to unlock
Figure 10.2a
75° F
Jet 1 Jet 2
Spa
8:01 am
Jet 3
Watercare: Beginner
Heating to 100°F
Figure 10.2b
Page 22
BAY Collection
= All ON/OFF Button: Tap one once to activate all of the Jets
pumps and lights.
= Jet Button: Tap one of the Jets pumps button to activate,
page 23.
= Fountain Button: Tap button to activate the fountain(s).
= Light Button: Tap button to turn the lights on or off. Will
default to the last setting used.
= Lighting Effects Button: Tap to access the menu to operate
the various lighting options, page 24.
= Music Button: Tap to access the menu to operate the audio
system and settings, page 26. If the hot tub does not have
the stereo option, there will not be a button on the control
panel.
= Home Button: Tap any time to return to the Home Menu.
= Settings Button: Tap to access the programming and setting
menus, page 30.
= Invert Button: Tap to enter the invert selection menu.
= Contrast Button: Tap to enter the contrast selection menu.
= Snooze Button: Tap to enter a sleep mode. A message is
displayed prompting you to tap the icon to continue.
B. Status Notications
ThestatusnoticationsdisplayatthetopoftheHomeScreenmenu.
When certain components, features or programs are on, their icons are
represented there.
= Stereo System Icon: Displays whenever the stereo is on,
page 26.
= Lighting System Icon: Will displayed to show that a Liquid
FX™ system is connected, page 24.
= Error Indicator Icon: Displays when there is error message
that needs to be addressed. The icon will also appear under
the temperature reading as a reminder, page 45.
= D1 Spa Connect Icon: Displays when there is a Wi-Fi
connection to the home router.
Page 23
BAY Collection
= Time Indicator: The time will always be shown when
the Home Menu is displayed. The appearance will vary
depending on whether the clock is set to a 12-Hour or
24-Hourconguration,page34.Thedefaultsettingis
12-Hour.
Note: The time will automatically adjust for daylight saving time.
11.0 Operating Instructions
11.1 D1 SmartHUB™ Touch Control
Your D1 hot tub is equipped with a D1 SmartHUB™ Touch Control that
offers an advanced high resolution interactive touch screen. Many of the
hot tub functions can be access through the Home Menu, Figure 11.1a.
11.2 Activating the Jets Pumps
From the Home Menu, (Figure 11.1a), tap to turn the Jets pumps
on. Anytime a pump has been manually turned on, it will automatically
turn off after approximately 30 minutes. If at this time you desire more jet
operation you may simply turn the pump(s) back on.
= Jets Pump 1 Button
= Jets Pump 2 Button
= Jets Pump 3 Button (if equipped)
1. Tap the Jets 1 button to turn the pump #1 on, in
low speed, tap again to turn the high speed on,
tap again to turn the pump off.
2. Tap the Jets 2 button to turn the pump #2 on
and off.
3. Tap the Jets 3 button to turn the pump #3 on and off.
Note: When a jets pump is on, the jets icon will spin.
6:45am
75° F
Jet 1
Watercare: Beginner
Heating to 100°F
Jet 2
Spa
8:01 am
Jet 3
Figure 11.1a
Jet 1
Jet 2
Jet 3
JETS ICON
WHEN OFF
JETS ICON
WHEN ON
Page 24
BAY Collection
11.3 Lights Menu
From the Home Menu, (Figure 11.3a), slide the left wheel until the light
icon ( ) is selected to enter the Light submenus. Then screen will
display the Light Submenu (Figure 11.3b). The default setting when
you enter the submenu is zone 2. From this menu, you can control the
interior lighting and blending effect. When you slide the right wheel, the
lights will turn on, either in zone 1 or zone 2.
Note: The lights automatically turn off after 1 hour. They can be
reactivated if needed. If you hot tub is equipped with exterior lights, they
are controlled by a sensor, activating at dusk and turning off at dawn.
= Zone 1 Button: Tap to turn ON the main light. When feature is
ON the light bulb is be illuminated.
= Zone 2 Button: Tap to turn ON all around lights. When
feature is ON the light bulb is be illuminated.
= Synchronization/De-synchronization Button: Tap to either
synchronize or desynchronize the main and all around lights.
They can be independently controlled. When the
synchronizing feature is on the icon be illuminated in yellow.
= Blending Button: Tap to turn ON the blending modes. Once
to turn ON the slow blending mode, tap a second time to turn
ON the fast blending mode, tap a third time to turn OFF.
Note: When the blending mode is turned OFF the lights will
default to the last solid color used.
= Slow Blending Button: Turns on when the you tap the
blending mode. The lights will blend in a slow and calm mode.
= Fast Blending Button: Tap the blending mode again to blend
the lights in a quick blending mode.
= Color Selection Wheel: Tap a color from the wheel to turn it
ON.
= Intensity Slider: Slide from side to side to increase
and decrease the intensity level.
Figure 11.3a
Figure 11.3b
LiquidFX
8:01 am
75° F
Jet 1
Watercare: Beginner
Heating to 100°F
Jet 2
Spa
8:01 am
Jet 3
Page 25
BAY Collection
11.4 Music Menu
Models equipped with the optional audio system offer an enhanced
hot tub experience. The Bluetooth® Stereo System works with most
Bluetooth wireless devices and provides access to local FM stations.
These models also include four hot tub engineered speakers for
unsurpassed sound quality and long-life, and an integrated subwoofer for
a superb acoustical sound.
Note: If the hot tub does not have the stereo option, there will not be a
button on the control panel.
To access the Music Menu, slide the left wheel to the music button ( ),
Figure 11.4a. The display will change to Figure 11.4b. Once you enter the
Music Menu, slide the right wheel to select a feature.
WARNING: RISK OF ELECTRICAL SHOCK HAZARD EX-
ISTS AND EQUIPMENT DAMAGE! Never install or remove
electrical devices while hands are wet or while sitting partially
immersed or fully immersed in hot tub!
= Power Button: Tap to turn the stereo on and off, page 26.
= Bluetooth Button: Tap to use your Bluetooth device with
the stereo. Can also be accessed by using the “src” source
button.
= Source Button: Tap to access the source submenu, page 26.
= Audio Settings Button: Tap to access the audio submenu,
page 26.
= Forward: Tap to advance forward through tracks.
= Rewind: Tap to move back through tracks.
= Pause/Play: Tap to pause and play tracks.
= Volume Slider: Slide from side to side to increase and
decrease the volume level.
Artist
Track Name
= Track Information: Will display the track, artist and
album information, if it is available. If the information is not
available this part will be blank. If the information provided
is too long, the maximum number of characters will be
display follow by dots (“...”).
Bluetooth
Audio is off
8:01 am
src
75° F
Jet 1
Watercare: Beginner
Heating to 100°F
Jet 2
Spa
8:01 am
Jet 3
Figure 11.4a
Figure 11.4b
src
Page 26
BAY Collection
11.5 Turning the Stereo ON
1. From the stereo menu, Figure 11.5a, press the power button ( )
to bring up the power on display, Figure 11.5b.
2. Press the power icon ( ) in the middle of the display.
11.6 Audio Settings Submenu
To enter the Audio Settings Menu, slide the right wheel to the settings
button ( ), Figure 11.6a. The display will change to Figure 11.6b. The
Audio Settings menu offers an enhanced audio experience by providing
adjustments to certain settings.
= Balance Slider: Slide from side to side to increase
and decrease the balance level between the left and
right.
= Fade Slider: Slide from side to side to increase and
decrease the fade level between the front and back.
= Subwoofer Slider: Slide from side to side to increase
and decrease the subwoofer level from minimum to
maximum.
11.7 Source Menu
Slide the right wheel to the source icon (
src
)
to select an audio source to listen to, Figure 11.7a.
Only the devices available will be displayed.
Bluetooth
Audio is off
8:01 am
src
Bluetooth
Power
Press icon to turn on the
audio
8:01 am
src
Figure 11.5b
Figure 11.5a
Bluetooth
Speakers
8:01 am
Max
Front
Right
Balance
Fade
SubWoofer
Min
Rear
Left
src
Bluetooth
Audio is off
8:01 am
src
Figure 11.6a
Figure 11.6b
Right
Balance
Left
Front
Fade
Rear
Max
SubWoofer
Min
Bluetooth
Source
Bluetooth
FM
8:01 am
src
Figure 11.7a
Page 27
BAY Collection
11.8 Bluetooth® Pairing Instructions
If you experience a connection problem with your Bluetooth device, make
sure that the Bluetooth antenna is secure and located at the highest point
within the equipment bay.
To pair your Bluetooth device to the Bluetooth
Stereo System, follow these steps:
1. Tap the music icon on the control panel screen
then tap either the Bluetooth or SRC, Figure
11.8a, button to select the Bluetooth option.
2. From your Bluetooth device, make sure that
the Bluetooth setting is ON.
3. Follow the pairing instructions for your Bluetooth device and connect
to the “Bluetooth Stereo System” device that appears on your screen.
4. If asked for a pin code, enter the code “5555” and then connect.
5. If the pairing process is successful, your Bluetooth device will show
“Connected” right next to “Bluetooth Stereo System”.
11.9 Adjusting Jet Flow
Your hot tub is equipped with D1’s Accent Jets that can adjust
and interchange with a simple twist motion for a customized
massage.Thewaterowandwaterpressureofyourjetscanbe
increased and decreased by rotating the outside jet face. Rotate
theoutsidejetfaceclockwisetodecreaseorshutoffwaterow.
Turncounterclockwisetoturnonorincreasewaterow.
Note: Always keep at least 6 adjustable jets open at all times.
11.10 Fountain Control
Turn on the fountain by tapping the fountain button ( ) on
the control panel. Use the fountain control valves (page 20) to
increase or decrease output.
Note:WhenintheOFFposition,somewatermaystillowthrough.
This is considered normal. It also prohibits any “standing water” in the
plumbing lines.
11.11 Underwater Magnetic Switches
D1’sexclusivemagneticswitchgivesyouunderwaterngertip
control of your hot tub’s major functions. Provides quick access
to preset functions such as turning on a pump in one position and
turning on the lights in the other position.
11.12 Jet Therapy Pillow™
D1’s patented Jet Therapy Pillow provides you with the
only adjustable neck and shoulder massage system in
theindustry.TheJetTherapyPillowhasveadjustable
height positions. Gently pull the pillow and slide it up or
downtheguiderails.Adjustthewaterowandwater
pressure from the jets by rotating their nozzles
clockwise or counterclockwise.
Bluetooth
Source
Bluetooth
FM
8:01 am
src
Figure 11.8a
Page 28
BAY Collection
11.13 Selecting the Desired Massage Action
Your D1 hot tub is equipped to allow you to customize the
massage action you desire. Each model incorporates massage
selector(s) that allows you to customize the massage and
performance by diverting water between various jet systems.
Simply turn the massage selector to divert water pressure to various jet
groups.
Note: It is considered normal for sound levels within the valve to vary
betweenpositionsduetothelargeamountsofwaterowingthrough
it.Foroptimumltrationbenets,leavethevalveinthecenterposition
when the hot tub is covered.
11.14 Status Light
The indicator light located on the front cabinet panel of the hot tub is
an early detection system that will notify you when the hot tub needs
immediate attention. The light logic is as follows:
• Solid Blue light: Hot tub functioning normal. (UltraPure™ is running,
all operations are normal.
• Flashing Blue light: Maintenance reminder
• Solid Red light: Hot tub error (indicates that immediate attention is
requiredtoclearorxanerrorcode.)
11.15 Dynamic Massage Sequencer™
The Dynamic Massage Sequencers control the jets in the lounge areas
to sequentially massage different muscle groups, Figure 11.15a. When
selectingamassagesequence,thehumangureonthecontrolpanel
displays corresponding lights, allowing a preview of that sequence before
starting it.
= Light Button: Turns the hot tub lights on and off.
= Jets button: Turns the jet pump associated with the
Sequencer on or off.
= Speed button: Changes the amount of time between each
step of the massage sequence. The default time is 5 seconds
intervals. The speed light will blink quickly.
• Press the speed button again to change it to 15 seconds
intervals. The speed light will blink slowly.
• Press again to change it to 30 seconds intervals. The
speed light will blink very slow.
1 2 3 4 5 6
Li
g
h
t
J
e
ts
S
p
e
e
d
S
eq
u
e
n
c
e
S
t
a
r
t
/St
o
p
Figure 11.15a
Page 29
BAY Collection
= Start/Stop Button: Press to start a massage sequence.
Press again to pause the massage in one of the six zones.
Press again to reactivate the sequence.
= Sequence Button: Chooses between the six different
massage sequences. Continually press to scroll through the
zones until the desired sequence is reached. The light glows,
under the selected number, to indicate the current sequence
that is active.
11.16 Operating the Dynamic Massage Sequencer
To operate the massage sequencer, follow these steps.
1. Press the Jets button to turn on the jet pump.
2. Continually press the Sequence button to select one of the six
massage options.
3. Press the Speed button to select the one of the three options.
4. Press the Start/Stop button to begin the sequence.
Sequence 1: Steps through each individual zone one at a time, from
zone A through F, then reverses the sequence.
Sequence 2: Activates all zones at once, then deactivates individual
zones one at a time, from A through F. Then it reverses
that sequence.
Sequence 3: Activates alternate groups of zones. It activates Zones A,
C, and E all at once, then switches to Zones B, D, and F.
Sequence 4: Steps through each individual zone one at a time, from zone
A through F, then it starts over in groups of two zones –
activating zones A and B, then zones B and C, etc.
Sequence 5: Starts with Zone A and adds new zones one at a time until
all zones are active. Then it reverses the sequence by
removing zones one at a time until all zones are inactive.
Sequence 6: Activates random pairs of zones at one time, starting
with adjacent zones, (A and B, then B and C, etc.), then
oppositezones(AandF,thenBandF,etc.),andnallythe
middle zones (B and E, then C and D, etc.).
Page 30
BAY Collection
12.0 Programming Instructions
Your D1 hot tub is equipped with setting menus that allow you to program
and activate different components of the hot tub. With our D1 Smart
Touch Control, programming your hot tub has never been easier. In the
sections that follow, we will guide you through the process of program-
mingthehottubtotyourpersonalcomfort.Slidetheleftwheeltothe
settings icon ( ) to enter the Settings Menu, Figure 12.0a and 12.0b.
Slide the right wheel to select one of the settings options.
Water Care
= Water Care: Provides access to the water care
programming, page 31. You can also access the
menu by tapping .
Maintenance
= Maintenance: Provides access to the reminders and
error log menu, page 33. You can also access the
menu by tapping .
Date & Time
= Date and Time: Provides access to the date and time
programming, page 34. You can also access the
menu by tapping .
Keypad
= Keypad: Provides access to the units, contrast, display
view and language settings, page 35. You can also
access the menu by tapping .
Electrical Config.
= Electrical Conguration: Provides access to the
electrical programming, page 36. This menu is to be
accessed by the dealer only. You can also access the
menu by tapping .
Wi-Fi
= Wi-Fi: Provides access to the Wi-Fi settings, page 36.
Miscellaneous
= Miscellaneous: Lets you program a “Warm weather”
settingthatallowslteringtooccureventhoughthe
water temperature is high, page 37. You can also
access the menu by tapping .
About
= About: Displays software and system information,
page 37. You can also access the menu by tapping
.
Settings Settings
Water Care
Maintenance
8:01 am
Keypad
Electrical Config
Date & Time
75° F
Jet 1
Watercare: Beginner
Heating to 100°F
Jet 2
Spa
8:01 am
Jet 3
Figure 12.0b
Figure 12.0a
Page 31
BAY Collection
12.1 Water Care
Your D1 hot tub is equipped with 5 programmable modes, Figure 12.1a.
Note: Economy mode will not allow the heater to turn on until the water
temperature reaches 20°F (11°C) below the set temperature; unless
programmed otherwise.
Away from home
= Away from home: In this economy mode, the heater
will not turn on until the water temperature reaches
20°F (11°C) below the set temperature.
Standard-Beginner
= Standard-Beginner: In this standard mode, the heater
can heat to maintain the set temperature.
Energy saving
= Energy saving: In this economy mode, during the peak
hours from Monday to Friday, the heater will not turn on
until the water temperature reaches 20°F (11°C) below
the set temperature. On the weekend, the temperature
will be maintained as programmed.
Super energy
= Super energy: In this economy mode, every day during
the peak hours, the heater will not turn on until the
water temperature reaches 20°F (11°C) below the set
temperature.
Weekender
= Weekender: In this economy mode, from Monday
to Friday, the heater will not turn on until the water
temperature reaches 20°F (11°C) below the set
temperature. On the weekend, the temperature will be
maintained as programmed.
= Water Care button: Multi-purpose button. It can be used to
select an option, to go back to the previous menu, and to exit
and return to the settings menu.
= Pencil Icon: This icon will appear next to the water care mode
that has been programmed. Tap to enter that mode to make
changes, Figure 12.1b.
= Trash Can Icon: This icon will appear next to an economy or
ltercyclethathasbeenprogrammed.Taptodeletethat
cycle.
Settings
Water Care
8:01 am
Settings
Water Care
Maintenance
8:01 am
Keypad
Electrical Config
Date & Time
Settings
Away from home
Standard-Beginner
Super energy
Weekender
Energy saving
Figure 12.1a
Figure 12.1b
Page 32
BAY Collection
A. Programming the economy cycles for all modes
1. Tap
Economy (2)
to program cycles, Figure 12.1c.
2. Then tap the plus sign,
+
, to add a new cycle or tap the cycle to
change,
1:00am 3:00amWeekend
. The display will change to
Figure 12.1d.
3. Slide each column (Day, Start or Stop) and select the day and time
to program. When done, tap to return to the previous screen. Tap
again to return to the settings menu.
B. Programming the lter cycles for all modes
1. Tap
Filter cycle (2)
to program cycles, Figure 12.1e.
2. Then tap the plus sign,
+
, to add a new cycle or tap the cycle to
change,
1:00am 1h30Weekend
. The display will change to
Figure 12.1f.
3. Slide each column (Day, Start or Duration) and select the day and
duration to program. When done, tap to return to the previous
screen. Tap again to return to the settings menu.
Settings Water Care
Away from home
8:01 am
Every day
Economy
Start Stop
1:00am 3:00am
12:00am 12:00am
Weekend
Economy (2)
Filter cycle (2)
+
Settings
Water Care :
8:01 am
Sunday
Monday
Weekend
Mon-Fri
6:30am 7:30am
7:00am
StartDay Stop
7:00am
6:00am
8:00am
7:30pm
8:00pm
8:30am
9:00am
Every day
Figure 12.1c
Figure 12.1d
Settings Water Care
Away from home
8:01 am
Every day
Filter cycle
Start Duration
1:00am 0h30
12:00am 0h20
Weekend
+
Economy (1)
Filter cycle (2)
Settings Water Care :
8:01 am
Sunday
Monday
Weekend
Mon-Fri
6:10am 12h10
12h00
StartDay Duration
6:20am
6:00am
12h20
6:30pm
6:40pm
12h30
12h40
Every day
Figure 12.1e
Figure 12.1f
Page 33
BAY Collection
12.2 Maintenance Menu
Scheduled maintenance will keep your hot tub working at an optimal
level. To help you accomplish this, reminders can be set to stay on track,
Figure 12.2b.
Reminders
= Reminders:Allowsyoutosetatimer,foraspecic
amount of time, that will countdown to remind you to
either clean or replace certain components.
Standby
= Standby: A setting that will turn off all pumps for
service. To return to normal operation, just cancel the
function. This setting will time out in 30 minutes.
Dealer info
= Dealer info: Provides the contact information for your
local dealer.
Vision cartridge
= Vision cartridge: Menu where you can deactivate the
vision cartridge reminder if your hot tub is not equipped
with one.
= Maintenance button: Multi-purpose button. It can be used to
select an option, to go back to the previous menu, and to exit
and return to the settings menu.
A. Reminders
To enter one of the maintenance menus, tap the tab. To reset the timer,
tap toentertheresetmenuandtaptheconrmtab.Toresetpress
Confirm
; to cancel press
Cancel
to return to the reminders menu.
When a time allotted expires, a message will appear on the Home menu.
= Rinse lter:A30-dayremindertorinsethelters.
= Clean lter:A60-dayremindertosoaktheltersinacleaning
solution.
Settings
Settings
Water Care
Maintenance
8:01 am
Keypad
Electrical Config
Date & Time
Settings
Maintenance
Reminders
Standby
8:01 am
Vision cartridge
Dealer info
Figure 12.2a
Figure 12.2b
Settings
Reminders
8:01 am
Rinse filter with hose
Required in 24 days
Clean filter in solution
Required in 54 days
Change water
Required in 114 days
Have a spa check up
Required in 724 days
Change ozonator
Settings
Maintenance
Reminders
Standby
8:01 am
Vision cartridge
Dealer info
Figure 12.2c
Figure 12.2d
Page 34
BAY Collection
= Change water: A 120-day reminder to change out the hot tub
water.
= Spa check: A 730-day reminder to have a general check up
performed.
= Change ozonator: A 540-day reminder to change out the
ozonator with a new unit.
= Reset all reminders: Will reset all the reminders, at the same
time, to the maximum setting.
B. Standby
When you tap the “Standby” tab, the display
changes to Figure 12.2e. This feature turns the
pumps OFF to perform routine maintenance
suchascleaningthelters.Toreturntonormal
operations, press
Cancel
. This feature will
timeout in 30 minutes. During the 30 minutes the display
will remain in the Standby menu, Figure 12.2e.
C. Dealer info
When you tap the “Dealer info” tab, the display
changes to Figure 12.2f. This feature provides the
contact information for your dealer.
D. Vision cartridge
When you tap the “Vision cartridge” tab, the display
changes to Figure 12.2g. This feature deactivates
the vision cartridge maintenance reminder, if you do
not have the cartridges installed.
12.3 Date & Time Menu
Programming the date and time is a simple and fast process. From the
settings menu, Figure 12.3a, press the “Date & Time” tab. The display
will change to Figure 12.3b.
Settings
Standby
8:01 am
All pumps off! Press
Cancel to exit Standby
mode.
Cancel
Figure 12.2e
Settings
Dealer info
8:01 am
Chemicals, parts and service
available at:
Figure 12.2f
Settings
Vision cartridge
8:01 am
Press the Confirm key for 5
sec. to deactivate the Vision
cartridge maintenance
reminder.
Confirm
Figure 12.2g
Settings
Date & Time
8:01 am
Set Date
Set Time
Settings
Settings
Water Care
Maintenance
8:01 am
Keypad
Electrical Config
Date & Time
Figure 12.3a
Figure 12.3b
Page 35
BAY Collection
Tap either the “Set Date” or “Set Time” tab. Once
the tab is press, the display will change and
self-adjust to the current date or time. You can
also scroll the columns if you would like to make
changes, Figure 12.3c.
12.4 Keypad Menu
From the keypad menu, you can program features that the control
panel will display. Tap the “Keypad” tab, Figure 12.4a, to enter the
programming features, Figure 12.4b.
A. Temperature Units
When you tap the “Temperature Units” tab, the
display changes to Figure 12.4c. Tap either the
Celsius or Fahrenheit tab to select the units to
display.
B. Display
When you tap the “Display” tab, the display
changes to Figure 12.4d. Tap either Normal or
Inverted to invert the display. This feature can also
be accessed by tapping the button from the
Home menu.
C. Contrast
When you tap the “Contrast” tab, the display
changes to Figure 12.4e. Tap either Day or Night
contrast to determine the best viewing option
for the control panel. This feature can also be
accessed by tapping the button from the
Home menu.
D. Language
When you tap the “Language” tab, the display
changes to Figure 12.4f. Tap the language you
want to display on the control panel. Scroll the
language list to view all the available languages.
Settings Date & Time
8:01 am
2015 December 10
2016 January 11
2017 February 12
2018 March 13
2019 April 14
Figure 12.3c
Settings
Keypad
8:01 am
Settings
Settings
Water Care
Maintenance
8:01 am
Keypad
Electrical Config
Date & Time
C F
Temperature Units
Display
Language
Contrast
Keypad Color
Figure 12.4a
Figure 12.4b
Settings
8:01 am
Temperature Units
Celsius
Fahrenheit
C
F
Figure 12.4c
Settings
8:01 am
Display
Normal
Inverted
Figure 12.4d
Settings
8:01 am
Contrast
Day contrast
Night contrast
Figure 12.4e
Settings
8:01 am
Language
English
Français
Polski
Español
Nederlands
Figure 12.4f
Page 36
BAY Collection
E. Keypad Color
When you tap the “Keypad Color” tab, the display
changes to Figure 12.4g. This feature allows you
to select the back-lighting color for the control
panel. Scroll the color list to view all the available
colors.
12.5 Electrical Configuration Menu
Theelectriccongurationmenuisafeaturethatshouldonlybeaccess
byyourdealeroraqualiedtechnician.
Note:Donotmakeanychangestothecongurationoncethehottub
has been installed and running. Contact your local dealer if you have any
questions.
12.6 Wi-Fi Menu (Optional)
IMPORTANT: The hot tub must have the optional Wi-Fi module installed.
Tap the “Wi-Fi” tab, Figure 12.6a, to load the available networks, Figure
12.6b. Make sure that you have the D1 Spa Connect app installed on
your device.
1. Tap the network you want to connect to,
Figure 12.6c.
2. The display will exit back to Figure 12.6a, and
continue the process.
3. Once connected, the display will change to
Figure 12.6d to show the connection was
successful.
Compatible devices
• iPod touch (3rd generation and later)
• iPhone (3GS and later)
• iPad Requires iOS 5.0 and higher
• Android 2.2 and higher, compatible with Google Play
Settings
8:01 am
Keypad Color
No Color
Red
Yellow
Green
Blue
Figure 12.4g
Settings
Settings
Wi-Fi
8:01 am
About
Not connected
Electrical Config.
Miscellaneous
Settings
Electrical Config.
8:01 am
1
1
40
Config.
Phases
Current
Figure 12.5a
Figure 12.5b
Settings
Settings
Wi-Fi
8:01 am
About
Not connected
Electrical Config.
Miscellaneous
Settings
Wi-Fi
8:01 am
Looking for networks
Figure 12.6a
Figure 12.6b
Settings
Settings
Wi-Fi
8:01 am
About
HotTubTime
Electrical Config.
Miscellaneous
Settings
Wi-Fi
HotTubTime
Netgear
MyNetwork
Infusion
8:01 am
Figure 12.6c
Figure 12.6d
Page 37
BAY Collection
Important information:
• The D1 Spa Connect is a 802.11b module
• The D1 Spa Connect is not compatible with the WEP security or
WAP Enterprise, WPA2 Enterprise and WPA2/WPA Mixed Enterprise
• Routers blocking broadcast messages and/or using WEP encryption
are not compatible with the D1 Spa Connect
12.7 Miscellaneous Menu
This menu offers two features.
A. Warm weather (Figure 12.7b)
When the pumps run, they generate heat that is transferred to the water
creatinganoverheatsituation.Thissettingwillallowlteringalthoughthe
temperature is high.
12.8 About Menu
This menu provides the software and electrical
information about the hot tub, Figure 12.8a.
Figure 12.7b
Settings
Miscellaneous
8:01 am
Warm weather
Info messages
Figure 12.7a
Settings
Warm weather
8:01 am
When a pump is running, it
generates heat that may
increase the water
temperature. When enabled,
this feature allows filtering
Off
Settings
About
8:01 am
in.k1000
in.yt
Low-level Config.
in.mix
48 v19.06_07
501 v8.01
1
32 v2.00
Figure 12.8a
Page 38
BAY Collection
13.0 Hot tub Maintenance
Proper and regular maintenance of your hot tub will help it retain its
beauty and performance. Your authorized Dimension One Spas dealer
can supply you with all the information, supplies, and accessory products
you will need to accomplish this.
!
DANGER: RISK OF SEVERE INJURY OR DROWNING
BY ENTRAPMENT!
• Keep hair, loose articles of clothing or hanging jewelry away
fromsuctionttings,rotatingjetsorothermovingcomponentsto
avoid entrapment that could lead to drowning or severe injury.
• Neverusethehottubunlessallsuctionguards,lter,lterlid,
or skimmer assembly are installed to prevent body and/or hair
entrapment.
• Neveroperateorusethehottubifthelter,lterlid,orskimmer
assembly are broken or any part of the skimmer assembly is
missing. Please contact your dealer or nearest service center
for service.
• Thesuctionttingsandsuctioncoversinthishottubaresized
tomatchthespecicwaterowcreatedbythepump(s).Ifit
isnecessarytoreplacethesuctionttings,suctioncoversor
pump(s),besurethattheowratesarecompatibleandarein
compliance with the VGB Safety Act, page 6.
• Neverreplaceasuctionttingorsuctioncoverwithonerated
lessthantheowratemarkedontheoriginalsuctiontting.
Usingimpropersuctionttingsorsuctioncoverscancreate
a body or hair suction entrapment hazard that may lead to
drowning or severe injury.
• Owners must alert all hot tub users to the potential risk of Hair,
Limb, Body, Evisceration (disembowelment), and Mechanical
Entrapment, page 6.
13.1 Cleaning the filters
IMPORTANT: To prevent debris from getting into the system during
ltercleaning,D1recommendsthatyoushutoffthepoweratthe
GFCI or enter “Standby Mode,” page 34.
A. Cleaning the Filter Cartridges
Yoursystemhastwolters.Toremoveandcleanthelters,follow
thesesteps.Werecommendthatyoucleantheltersonceamonthas
preventativemaintenance.Everyothercleaning,soaktheltersinlter
cleaning solution and rinse thoroughly.
1. Turn the breaker, to the hot tub, OFF or put the hot tub in “Stand
By” mode!
2. Accessthelterundertheskimmerbasket,Figure13.1a,liftthe
centeroatofftheskimmerassemblyuntilfullyextended.Turn
Page 39
BAY Collection
counterclockwiseuntiltheatsofthebasketlineupwiththesecuring
tabs. Pull the assembly straight up to remove, Figure 13.1c.
3. ToaccesstheUltraPurelter,turnlidcounterclockwiseuntiltheats
line up with the securing tabs and pull, Figure 13.1b.
4. Removeeachlterbytwistingit¼turncounterclockwiseandlifting
out of its canister, Figure 13.1d.
5. Rinsethelterswithagardenhoseandahigh-pressurenozzle,
Figure 13.1e.
6. Reinstalltheltersbyreversingthestepsforremoval,replacethe
skimmer basket or lid and turn the power back on at the GFCI.
B. Cleaning the UltraPure Inner Filter Screen
The Filter Screen is a black plastic perforated cylinder located at the
bottomofthecanisterthatholdsthelter.Itnormallyrequiresno
maintenance.However,ifthespafrequentlysaystocleanthelter,orif
thespaisreporting“lowwaterow,”cleanthescreeninadditiontothe
lter(s).
IMPORTANT: To prevent debris from getting into the pump, be sure
toremoveanyoatingdebrisBEFOREremovingthelterscreen.
1. Make sure that the breaker, to the hot tub, is OFF or put the hot
tub in “Stand By” mode!
2. First,removethelter(s)asdescribedintheCleaningtheFilter
Cartridges section.
3. ThenlocatetheblackplasticFilterScreenatthebaseofthelter
canister, Figure 13.1f.
4. Removethelterscreenbyinsertingthetipofaat-blade
screwdriver into the slot as shown, Figure 13.1g, and gently apply
outward pressure until the catch releases.
5. Thenlifttheblackscreentoremoveitfromtheltercanister,Figure
13.1h. Clean the screen with water, using pressure from the inside of
each screen.
6. PresstheFilterScreenbackontothebaseofthespaltercanister.
7. Replacethelterintoitscanisterandreplacethelid.
CARTRIDGE
O
F
F
O
N
O
F
F
O
N
Figure 13.1a
Figure 13.1b
Figure 13.1c
Figure 13.1d
Figure 13.1e
Page 40
BAY Collection
8. Then turn the power back on or exit the “Standby” Mode, if it was
used, as described above.
C. Vision Cartridge
The Vision Cartridge offers D1 hot tub users a natural and effective
way to reduce the use of chemically-based water sanitation systems.
Used in combination with D1 ozone systems, the Vision Cartridge uses
silver catalyst technology that kills 99.96% of impurities on contact. One
Vision Cartridge lasts up to 6 months and can reduce the need for extra
chemicals by 60% for cleaner, healthier and softer water.
13.2 Surface Care
IMPORTANT: Do not use alcohol, ammonia, bleach or any citrus
based cleaners on any of your hot tub surfaces. Do not use “409”
type cleaners or other caustic solutions as they may damage the
hot tub shell surface and void the warranty.
IMPORTANT: Protect the hot tub surface from the sun and the cold!
Keep the hot tub covered when empty of water. Sunlight and ex-
treme cold can damage the surface and cause it to peel or blister.
Use a hot tub cleaner and a soft rag to clean the inside of your hot tub.
Be sure to thoroughly rinse the shell. After cleaning, you will want to
restore your hot tub shell’s original luster by using Dimension One Spas’
Poli-Gloss.
13.3 Maintaining the Hot Tub Cabinet
The hot tub cabinet requires little or no maintenance of any kind. To
clean, wipe cabinet with a clean towel and mild detergent soap solution.
CAUTION: Never spray cabinet with a high-pressure garden
hose for any reason since this action may induce an electrical
short in the hot tub’s electrical equipment.
Figure 13.1f
Figure 13.1g
Figure 13.1h
Page 41
BAY Collection
13.4 Pillow Care
Remove and clean the headrest pillows, as needed, with soapy water us-
ing a cloth or soft-bristle brush. Always remove the pillows when adding
chemical shock treatment to the spa water. The pillows can be returned
to the spa when the sanitizer reading is stable as recommended.
13.5 Draining
IMPORTANT: Keep the hot tub covered when empty of water. Sun-
light and extreme cold can damage the surface and cause it to peel
or blister.
1. Turn power OFF!
2. Locate the hose bib, at the bottom of the hot tub, Figure 13.7a. Make
sure that the valve is in the OFF position.
3. Unscrew the cap from the spa drain, Figure 13.7b.
4. Attach one end of your garden hose to the drain valve, Figure 13.7c.
Place the other end in an area safe for water runoff.
5. Turn the hose bib switch to the open position to release the water,
Figure 13.7d.
6. Once the hot tub is drained, turn the switch back to the closed
position, remove the hose and reinstall the cap.
13.6 Winterizing
All D1 spas are designed for year-round use. Your hot tub has an
automatic freeze protection mode to circulate water during freezing
weather, assuming the system has electrical power and the proper water
level. However, if freezing weather prohibits normal use, an authorized
service provider should winterize your hot tub. Draining the unit will
not prevent freeze damage, as small amounts of water in the plumbing
canexpandanddamagethesystem.Winterizingtheunitisspecically
not covered by the manufacturers’ warranty, so you should contact a
professional to both winterize and restart your hot tub if necessary.
Freezedamagecausedbywinterizingyoursystemisspecicallynot
covered by your warranty.
13.7 Special Cold Weather Instructions
The system has a “Smart Winter” freeze protection mode to circulate
water during freezing weather, assuming the system has electrical power
and the proper water level. It will automatically activate the pump(s) to
circulate water. This is a normal hot tub function. No corrective action is
necessary. This feature protects the spa from freezing.
Figure 13.5a
Figure 13.5b
Figure 13.5c
Figure 13.5d
Page 42
BAY Collection
However, if there freezing conditions present and shutting down the spa
for the winter is unavoidable, or where conditions may get too cold for
the spa’s “Smart Winter” mode to prevent freezing, the spa should be
Winterized by a professional Dimension One dealer or authorized service
representative.
13.8 Maintaining the Cover
UltraLast™ and UltraLast™ Extreme Covers: Dimension One Spas®
is committed to maintaining the quality of your hot tub. That’s why our
patented UltraLast™ and UltraLast™ Extreme Covers have superior
durability. They are UV, water, mold and mildew resistant to protect your
tub against environmental exposure.
Vinyl Covers: To maintain a “nearly original” appearance on your vinyl
cover, it is recommended that a protectant with a high SPF (sun protection
factor) is applied at least once a month if exposed to direct sunlight. You
will also want to clean and condition your cover monthly or as needed
based on exposure. For more information, consult your dealer.
A. To clean and condition the encasement (cover skin):
1. Use a garden hose to remove any debris.
2. Using a large sponge or soft bristle brush, use diluted or mild soap to
gently scrub the top.
3. Rinse and clean and do not allow soap to dry on the cover. Do not
use soap on the underside of the cover.
4. Please check with your Dimension One Spas dealer for
recommended cover care and conditioning products. Use non-
petroleum based conditioners to keep the vinyl supple.
5. Do not use any solvents, abrasive cleaners or strong detergents.
Do not use products that contain silicone or alcohol.
B. Additional Care and Maintenance Instructions:
1. Debris can accumulate on the spa cover. Removal of snow or other
debris will help to avoid breakage of the foam cores.
2. Be sure to lock the cover straps to secure the cover from unwanted
or accidental entry.
3. Do not place heavy objects on the vinyl.
4. Do not walk, sit or stand on the cover.
5. Donotdragorusetheaps/skirtorthecoverlockstrapstoremove
the cover.
6. Use only recommended cover lift systems.
7. Use only chemicals and cleaners recommended by Dimension One
Spas.
8. Remember to keep spa covered when not in use.
9. Do not expose your spa to the sun for extended periods of time as
UV rays can damage the interior surface.
10. Use caution when removing cover. Before removing cover, assure all
locks have been released to avoid lock breakage and/or cover strap
damage.
Page 43
BAY Collection
13.9 Restarting Your Hot Tub in Cold Weather
If you want to start up your hot tub after it has sat empty for a time in
freezing temperatures, be aware that the water remaining in certain
sections of the piping may still be frozen. This situation will block
waterowpreventingthehottubfromoperatingproperlyandpossibly
damaging the equipment. We recommend you consult your dealer
for guidance before attempting to restart your hot tub under these
conditions.
14.0 Water Quality Maintenance
To decrease the risk of contracting a waterborne illness (e.g. an infection,
bacteria or virus) and/or respiratory ailments
, m
aintain water quality
withinspeciedlimits.Thiswillenhanceyourenjoymentandprolong
the life of the hot tub’s equipment. Doing so requires regular attention
because the water chemistry involved is a balance of several factors.
Procrastination regarding water maintenance will result in poor and
potentially unhealthful conditions for soaking and even damage to your
hottubinvestment.Forspecicguidance,onmaintainingwaterquality,
consult your authorized dealer who can recommend the appropriate
chemical products.
WARNING: FAILURE TO MAINTAIN WATER QUALITY
WILL:
• Increase risk of contracting a waterborne illness (e.g. an
infection bacteria or virus) and/or respiratory ailments
.
• Damage the equipment, components and hot tub shell,
which are not covered under the hot tub’s warranty.
!
CAUTION: Never store hot tub chemicals inside the hot tub’s
equipment bay. The equipment bay may reach elevated tempera-
tures, this is where high voltage electronic devices are located. This
area is not intended for storage of any kind.
14.1 UltraPure™ Plus
!
WARNING: ALLOW LAMP TO COOL DOWN
PRIOR TO REMOVING FROM HOUSING.
!
DANGER: NEVER LOOK AT THE LIT BULB.
THIS CAN CAUSE SEVERE EYE DAMAGE OR
BLINDNESS.
UltraPure Plus water management is the most advanced,
UL-approvedwaterpuricationsystemintheindustry,Figure
14.1a. This dual system allows for jets and pumps to work in
harmony,soyou’llneverhavetosacricejetperformance
while cleaning your water. This patented system builds
Figure 14.1a
Page 44
BAY Collection
on UltraPure™ by introducing ultra violet light to the equation. Together
ozone and UV light are unstoppable. UV light comes in contact with
10,000 gallons of water per day, meticulously neutralizing any remaining
impurities. Enjoy clean, pure water and peace of mind. This system can
be found on the Bay Collection.
TheUltraPurePlusWaterManagementSystemsilentlypuriesyour
water, eliminating bacteria by mixing ozone with water and emitting a
second UV light frequency that neutralizes water impurities. In order to
keep the UltraPure Plus System running at its best, it is re-commended
that you change the UV bulb every 18 months. The UltraPure Plus
UV compartment is located within the equipment bay. Contact your
authorized Dimension One Spas dealer for replacement parts and/or to
service your UltraPure Plus System.
WARNINGS:
• Do not operate the UV-C emitter when it is removed from the appli-
ance enclosure.
• This appliance contains a UV-C emitter.
• Unintended use of the appliance or damage to the housing may re-
sult in the escape of dangerous UV-C radiation. UV-C radiation may,
even in little doses, cause harm to the eyes and skin.
• Appliances that are obviously damaged must not be operated.
• Read the maintenance instructions before opening the appliance.
!
14.2 pH Control
pH is a measure of relative acidity or alkalinity of water and is measured
on a scale of 0 to 14. The midpoint of 7 is said to be neutral, above which
is alkaline and below which is acidic. In hot tub water, it is very important
to maintain a slightly alkaline condition of 7.4 to 7.6. Problems become
proportionately severe the further outside of this range the water gets. A
low pH will be corrosive to metals in the hot tub equipment. A high pH will
cause minerals to deposit on the interior surface (scaling). In addition,
the ability of the sanitation agents to keep the hot tub clean is severely
affected as the pH moves beyond the ideal range. That is why almost all
hot tub water test kits contain a measure for pH as well as sanitizer.
14.3 Sanitizing
To destroy bacteria and organic compounds in the hot tub water, a
sanitizer must be used regularly. Chlorine and bromine are the two most
popular sanitizers used to date. Many other additives are available for
your hot tub. Some are necessary to compensate for out-of-balance
water; some aid in cosmetic water treatment and others simply alter the
feel or smell of the water. When adding hot tub shock (chlorine or non-
chlorine) or pH balancing chemicals activate the jet pump(s) and leave
the hot tub cover open for a minimum of 20 minutes. By doing this you
will allow excessive chemical vapors to exit the hot tub, protecting pillows
and plastic knobs from chemical attack.
Page 45
BAY Collection
WARNING: RISK OF PERSONAL INJURY, DROWNING
OR ENTRAPMENT! Never leave your hot tub unattended for
any reason while the cover is open and accessible, especially
to small children and animals!
CAUTION: RISK OF PERSONAL INJURY OR HOT TUB
DAMAGE!
Never add chlorine tablets (trichlor) or acid to your
hot tub for any reason! These chemicals may damage com-
ponents within your hot tub, burn or irritate your skin, create a
rash and void the manufacturer warranty for your hot tub.
!
14.4 Other Additives
Many other additives are available for your hot tub. Some are necessary
to compensate for out-of-balance water, some aid in cosmetic water
treatment and others simply alter the feel or smell of the water. For
specicguidance,onmaintainingwaterquality,consultyourauthorized
dealer who can recommend the appropriate chemical products.
15.0 Protective Conditions/Error Messages
There are a number of unique functions designed into your D1 hot tub to
protect it from damage and/or to aid in troubleshooting. The error indica-
tor as well as a screen will notify you when the hot tub needs imme-
diate attention. Following is a listing of all the possible messages along
with their meanings. Always insist on genuine Dimension One Spas
replacement parts.
Code Description
HL
High Limit circuit has tripped. This must be repaired only
byaqualiedauthorizedserviceorganizationorservice
technician.
FLO
• Noowconditionformorethan2hours.Contactyour
authorized dealer or service organization.
• Noowcondition“HRA”hardwareerrorwas
detected (relay stuck). Contact your authorized
dealer or service organization.
Page 46
BAY Collection
Code Description
OH
DO NOT ENTER THE WATER! Spa temperature
is too high. Contact your authorized dealer or service
organization.
WARNING: RISK OF HYPERTHERMIA (OVER-
HEATING) CAUSING SEVERE INJURY, BURNS,
OR WELTS.
Pr
Temp probes or detection circuit are defective. This
mustberepairedonlybyaqualiedauthorizedservice
organization or service technician.
AOH
Elevated internal temperature. Controller temperature has
exceeded acceptable limits. If condition persists, provide
shade for equipment side of spa. Contact your authorized
dealer or service organization.
FCL The pressure switch is closed. Contact your authorized
dealer or service organization.
SP in Input voltage issue. Contact your authorized dealer or
service organization.
HR Hardware error was detected (thermal fuse). Contact
your authorized dealer or service organization.
UPL
The hot tub pack does not have valid software. Contact
your authorized dealer or service organization.
CFLO Noowcondition.Contact your authorized dealer or
service organization.
Comm Verify cable connections. Contact your authorized dealer
or service organization.
Supp Connect power cord to 240V source.
PoUP Power up.
!
Page 47
BAY Collection
16.0 Stereo Cautions
WARNING: RISK OF ELECTRICAL SHOCK
HAZARD EXISTS AND EQUIPMENT DAM-
AGE!
Never install or remove electrical devices (e.g. Apple
device/MP3/USB/AUX/Bluetooth) while hands are wet or while
sitting partially or fully immersed in the hot tub!
1. “CAUTION - Risk of Electric Shock. Do not
leave compartment door open.”
2. “CAUTION - Risk of Electric Shock. Replace
components only with identical components.”
3. “Do not operate the audio/video controls while inside
in the spa.”
4. “WARNING - Risk of Electrocution. Do not connect any auxiliary
components (for example cables, additional speakers, headphones,
additional audio/video components, etc.) to the system.”
5. These units are not provided with an outdoor antennae; when
provided, it should be installed in accordance with Article 810 of the
National Electrical Code, ANSI/NFPA 70.
6. Do not service this product yourself as opening or removing covers
may expose you to dangerous voltage or other risk of injury. Refer all
servicingtoqualiedservicepersonnel.
7. When the power supply connections or power supply cord(s) are
damaged; if water is entering the audio/video compartment or any
electrical equipment compartment area; if the protective shields or
barriers are showing signs of deterioration; or if there are signs of
other potential damage to the unit, turn off the unit and refer servicing
toaqualiedservicepersonnel.
8. This unit should be subjected to periodic routine maintenance
(for example, once every 3 months) to make sure that the unit is
operating properly.
DANGER
!
RISK OF SHOCK OR
ELECTROCUTION!
www.d1spas.com
© 2017 Dimension One Spas.
All trademarks and registered trademarks
are the property of their respective owners.
PN: 6530-538 Rev. C (10/18)