ANNEX
OVERVIEW OF STANDARDS
Federal Republic of Germany
DIN 109 Sheet 1 – Drive Elements; Circumferential Speeds
DIN 109 Sheet 2 – Drive Elements; Centre Distances for V-Belt Drives
DIN 111 – Pulleys for Flat Transmission Belts; Dimensions. Nominal
Torques
DIN 111 Sheet 2 – Pulleys for Flat Transmission Belts; Classication for
Electrical Machines
DIN 2211 Sheet 1 – Grooved Pulleys for Narrow V-Belts; Dimensions.
Materials
DIN 2211 Sheet 2 – Grooved Pulleys for Narrow V-Belts; Inspections of
Grooves
DIN 2211 Sheet 3 – Grooved Pulleys for Narrow V-Belts; Classication for
Electrical Machines
DIN 2215 – Endless V-Belts, Classical Proles; Minimum Datum
Diameter of the Pulleys, Internal and Datum Belt Length
DIN 2216 – Open-Ended V-Belts; Dimensions
DIN 2217 Sheet 1 –
V-Belt Pulleys for Classical Proles; Dimensions. Materials
DIN 2217 Sheet 2 – V-Belt Pulleys for Classical Proles; Inspections of
Grooves
DIN 2218 – Endless V-Belts, Classic Proles for Mechanical
Engineering; Calculation of Drives, Performance Data
DIN 7716 – Rubber Products; Requirements for Storage, Cleaning
and Maintenance
DIN 7719 Part 1 – Endless Wide V-Belts for Industrial Speed Changers;
Belts and Groove Proles for Corresponding Pulleys
DIN 7719 Part 2 – Endless Wide V-Belts for Industrial Speed Changers;
Measurement of Centre Distance Variations
DIN 7721 Part 1 – Synchronous Belt Drives, Metric Pitch;
Synchronous Belts
DIN 7721 Part 2 – Synchronous Belt Drives. Metric Pitch;
Tooth Space Prole of Synchronous Pulleys
DIN 7722 – Endless Hexagonal Belts for Agricultural Machines and
Groove Proles of Corresponding Pulleys
DlN 7753 Part 1 – Endless Narrow V-Belts for Mechanical Engineering;
Dimensions
DIN 7753 Part 2 – Endless Narrow V-Belts for Mechanical Engineering;
Drive Calculation, Performance Data
DIN 7753 Part 3 – Endless Narrow V-Belts for the Automotive Industry;
Dimensions
DIN 7753 Part 4 – Endless Narrow V-Belts for the Automotive Industry;
Fatigue Testing
DIN 7867 – V-Ribbed Belts and Pulleys
DIN/ISO 5290 – Grooved Pulleys for Joined Narrow V-Belts;
Groove Proles 9J; 15J; 20J; 25J
DIN 22100-7 – Articles from Synthetics for Use in Underground Mines,
Paragraph 5.4 – V-Belts
DIN EN 60695-11-10
– Fire Hazard Testing
ISO – lnternational Organization for Standardization
ISO 22 –
Widths of Flat Transmission Belts and Corresponding
Pulleys
ISO 63 – Flat Belt Drives; Lengths
ISO 99 – Diameter of the Belt Pulleys for Flat Belts
ISO 100 – Bulging Height of the Belt Pulleys for Flat Belts
ISO 155 – Belt Pulleys; Limiting Values for Adjustment of Centre
Distances
ISO 254 – Quality, Finish and Balance of Belt Pulleys
ISO 255 – Pulleys for Classical V-Belts and Narrow V-Belts;
Geometric Testing of Grooves
ISO 1081 – Vocabulary from V-Belts, V-Ribbed Belts and Pulleys
ISO 1604 – Endless Speed Changer Belts and Pulleys for Mechani-
cal Engineering
ISO 1813 – Electrical Conductivity of V-Belts, Kraftbands, V-Ribbed
Belts, Wide V-Belts and Double Prole V-Belts
ISO 2230 – Please Consult DIN 7716
ISO 2790 – Narrow V-Belt Drives for the Automotive Industry;
Dimensions
ISO 3410 – Endless Speed Changer Belts and Pulleys for Agricultural
Machinery
ISO 4183 – Grooved Pulleys for Classical V-Belts and Narrow V-Belts
ISO 4184 – Classical V-Belts and Narrow V-Belts; Lengths
ISO 5256 –
Synchronous Belt Drives; Belt Tooth Pitch Code
Part 1 MXL; XL; L; H; XH; XXH
Part 2 MXL; XXL Metric Dimensions
ISO 5287 – Narrow V-Belt Drives for the Automotive Industry;
Fatigue Test
ISO 5288 – Vocabulary from Timing Belt Drives
ISO 5289 – Endless Double Prole V-Belts and Pulleys for Agricultural
Machinery
ISO 5290 – Grooved Pulleys for Joined Narrow V-Belts;
Proles: 9J; 15J; 20J; 25J
ISO 5291 – Grooved Pulleys for Joined Classical V-Belts;
Proles: AJ; BJ; CJ; DJ
ISO 5292 – Industrial V-Belt Drives; Calculations of the Performance
Data and Centre Distance
ISO 5295 – Timing Belts; Calculations of the Performance Data and
Centre Distance – “Inch Pitch”
ISO 8370-1 –
Dynamic Test to Determine Pitch Zone Location with V-Belts
ISO 8370-2 – Dynamic Test to Determine Pitch Zone Location with
V-Ribbed Belts
ISO/DIS 8419 – Belt Drives; Joined Narrow V-Belts; Lengths in Effective
System; 9N/J, 15N/J, 25N/J
ISO 9010 – Synchronous Belt Drives – Automotive Belts
ISO 9011 – Synchronous Belt Drives – Automotive Pulleys
ISO 9563 – Antistatic Endless Synchronous Belts; Electrical
Conductibility; Characteristics and Testing Method
ISO 9980 – Belt Drives; V-Belt Pulleys, Geometric Inspection of
Grooves
ISO 9981 – Belt Drives – Pulleys and V-Ribbed Belts for the
Automotive Industry; PK Prole
ISO 9982 – Belt Drives; Pulleys and V-Ribbed Belts for Indus-
trial Requirements; Geometric Data PH, PJ, PK, PL, PM
ISO 11749 – Belt Drives – V-Ribbed Belts for the Automotive Industry,
Fatigue Testing
ISO 12046 – Synchronous Belt Drives – Automotive Belts – Physical
Characteristics
ISO 13050 – Synchronous Belt Drives – Metric Pitch. Curvilinear
Prole Systems G, H, R and S, Belts and Pulleys
ISO 17396 – Synchronous Belt Drives – Metric Pitch, Trapezoidal
Prole Systems T and AT, Belts and Pulleys
ISO 19347 – Synchronous belt drives -- Imperial pitch trapezoidal
prole system -- Belts and pulleys
USA
RMA/ARPM IP-20 – Classical V-Belts and Sheaves
(A; B; C; D; Cross Proles)
RMA/ARPM IP-21 – Double (Hexagonal) Belts (AA; BB; CC; DD Cross
Proles)
RMA/ARPM IP-22 – Narrow Multiple V-Belts (3V; 5V; and 8V Cross Proles)
RMA/ARPM IP-23 – Single V-Belts (2L; 3L; 4L; and 5L Cross Proles)
RMA/ARPM IP-24 – Synchronous Belts (MXL; XL; L; H; XH; and XXH Belt
Proles)
RMA/ARPM IP-25 – Variable Speed V-Belts (12 Cross Proles)
RMA/ARPM IP-26 – V-Ribbed Belts (PH; PJ; PK; PL; and PM Cross Proles)
RMA/ARPM IP-27 – Curvilinear Toothed Synchronous Belts
(8M – 14M Pitches)
ASAE S 211. ... – V-Belt Drives for Agricultural Machines
SAE J636b – V-Belts and Pulleys
SAE J637 – Automotive V-Belt Drives
178
© OPTIBELT GMBH, GERMANY