W1070/W1080ST
Digital Projector
Home Cinema Series
User Manual
2 Table of contents
Table of contents
Important safety instructions.......3
Overview..........................................6
Shipping contents...................................... 6
Replacing the remote control
batteries...................................................... 7
Remote control effective range ............7
Projector features ....................................9
Projector exterior view........................10
Controls and functions..........................11
Control panel ............................................... 11
Remote control............................................ 12
Positioning your projector........ 13
Choosing a location ...............................13
Obtaining a preferred projected
image size .................................................14
How to determine the position of the
projector for a given screen size ............. 14
How to determine the recommended
screen size for a given distance ................ 14
Projection dimensions ................................ 16
Shifting the projection lens vertically ...... 20
Connecting with video
equipment ..................................... 21
Preparations.................................................. 21
Connecting HDMI devices......................... 21
Connecting component-video devices ... 22
Connecting S-Video or video devices.....22
Connecting a computer .............................23
Using the projector..................... 24
Turning the projector on .....................24
Selecting an input source......................25
Fine-tuning the image size and
clarity.........................................................25
Using the menus .....................................26
Securing the projector ..........................26
Using a security cable lock ........................ 26
Utilizing the password function................ 27
Adjusting the projected image.............29
Adjusting the projection angle .................29
Correcting picture distortion....................29
Fine-tuning the picture quality ............ 31
Advanced picture quality controls ..... 33
Adjusting the sound............................... 35
Selecting the aspect ratio..................... 36
Magnifying and searching for details .. 37
Operating in a high altitude
environment............................................ 37
Watching 3D content ........................... 38
Personalizing the projector menu
display ....................................................... 39
Locking control keys............................. 39
Turning the projector off..................... 39
On-Screen Display (OSD) menus...... 40
Additional information................47
Care of the projector ........................... 47
Lamp information................................... 48
Getting to know the lamp hour................48
Extending lamp life .......................................48
Timing of replacing the lamp .....................49
Replacing the lamp .......................................50
Indicators ................................................. 52
Troubleshooting..................................... 53
Specifications........................................... 54
Warranty and Copyright
information....................................61
3
Important safety instructions
Thank you for your purchase of this quality BenQ video projector! It has been designed to provide you
with an enjoyable home theater viewing experience. For the best results, please read this manual through
carefully as it is your guide through the control menus and operation.
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information technology
equipment. However, to ensure safe use of this product, it is important that you follow the instructions
mentioned in this manual and marked on the product.
1. Please read this user manual before you operate your
projector. Keep this manual in a safe place for future
reference.
2. Always place the projector on a level, horizontal
surface during operation.
- Do not place the projector on an unstable cart,
stand, or table as it may fall and be damaged;
- Do not place inflammables near the projector;
- Do not use if tilted at an angle of more than 10
degrees left to right, nor at angle of more than 15
degrees front to back.
3. Do not store the projector on end vertically. Doing so
may cause the projector to fall over, causing injury or
resulting in damage.
4. Do not place the projector in any of the
following environments:
- space that is poorly ventilated or confined.
Allow at least 50 cm clearance from walls
and free flow of air around the projector;
- locations where temperatures may become
excessively high, such as the inside of a car
with all windows closed;
- locations where excessive humidity, dust,
or cigarette smoke may contaminate optical
components, shorten the projector’s
lifespan and darken the screen;
- locations near fire alarms;
- locations with an ambient temperature
above 35°C/95°F;
- locations where altitude is higher than 1500
meters/4920 feet above sea level.
4920-
9840
feet
4
Important safety instructions
5. Do not block the vents holes while the projector
is on (even in standby mode):
- Do not cover the projector with any item;
- Do not place the projector on a blanket,
bedding or any other soft surface.
9. Do not look straight into the projector lens
during operation. It may harm your sight.
6. In areas where the mains power supply voltage
may fluctuate by ±10 volts, it is recommended
that you connect your projector through a power
stabilizer, surge protector or uninterruptible
power supply (UPS) as appropriate to your
situation.
10. Do not operate the projector lamp beyond the
rated lamp life. Excessive operation of lamps
beyond the rated life could cause a lamp to break
on rare occasions.
7. Do not step on the projector or place any objects
upon it.
11. The lamp becomes extremely hot during
operation. Allow the projector to cool for
approximately 45 minutes prior to removing the
lamp assembly for replacement.
8. Do not place liquids near or on the projector.
Liquids spilled into the projector will void your
warranty. If the projector does become wet,
disconnect it from the power point and call BenQ
to have the projector repaired.
12. This projector is capable of displaying inverted
images for ceiling mount installation. Use only
BenQ's Ceiling Mount Kit for mounting.
5
Important safety instructions
13. Never attempt to replace the lamp assembly until
the projector has cooled down and is unplugged
from the power supply.
14. When you think service or repair is required,
take the projector only to a suitably qualified
technician.
15. Do not attempt to disassemble this projector.
There are dangerous high voltages inside which
may cause death if you should come into contact
with live parts. The only user serviceable part is
the lamp which has its own removable cover. See
page 50.
Under no circumstances should you ever undo or
remove any other covers. Refer servicing only to
suitably qualified professional service personnel.
Notice
Please keep the original packing for possible future
shipment. If you need to pack your projector after
use, adjust the projection lens to an appropriate
position, put the lens cushion around the lens, and
fit the lens cushion and projector cushion together
to prevent damage during transportation.
Moisture condensation
Never operate the projector immediately after
moving it from a cold location to a hot location.
When the projector is exposed to such a change
in temperature, moisture may condense on the
crucial internal parts. To prevent the projector
from possible damage, do not use the projector
for at least 2 hours when there is a sudden change
in temperature.
Avoid volatile liquids
Do not use volatile liquids, such as insecticide or
certain types of cleaner, near the projector. Do
not have rubber or plastic products touching the
projector for a long time. They will leave marks on
the finish. If cleaning with a chemically treated
cloth, be sure to follow the cleaning product’s
safety instructions.
Disposal
This product contains the following materials
which are harmful to human bodies and
environment.
• Lead, which is contained in solder.
• Mercury, which is used in the lamp.
To dispose of the product or used lamps, consult
your local environment authorities for regulations.
6
Overview
Overview
Shipping contents
Carefully unpack and verify that you have the items below. Some of the items may not be available
depending on your region of purchase. Please check with your place of purchase.
Some of the accessories may vary from region to region.
The warranty card is only supplied in some specific regions. Please consult your dealer for detailed
information.
W1070 W1080ST
Projector
Remote control
Batteries
Warranty card
User manual CD
Quick start guide
Power cable
VGA cable
Carry bag (W1080ST only)
7
Overview
Replacing the remote control batteries
1. To open the battery cover, turn the remote control over to view its back, push on the finger grip on
the cover and slide it up in the direction of the arrow as illustrated. The cover will slide off.
2. Remove any existing batteries (if necessary) and install two AAA batteries observing the battery
polarities as indicated in the base of the battery compartment. Positive (+) goes to positive and
negative (-) goes to negative.
3. Refit the cover by aligning it with the base and sliding it back down into position. Stop when it clicks
into place.
• Avoid leaving the remote control and batteries in an excessive heat or humid environment like the
kitchen, bathroom, sauna, sunroom or in a closed car.
• Replace only with the same or equivalent type recommended by the battery manufacturer.
• Dispose of the used batteries according to the manufacturer's instructions and local environment
regulations for your region.
• Never throw the batteries into a fire. There may be danger of an explosion.
• If the batteries are dead or if you will not be using the remote control for an extended period of time,
remove the batteries to avoid damage to the remote control from possible battery leakage.
Remote control effective range
The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR
remote control sensor(s) to function correctly. The distance between the remote control and the
sensor(s) should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor(s) on the projector
that might obstruct the infra-red beam.
Ceiling mounting the projector
We want you to have a pleasant experience using your BenQ projector, so we need to bring this safety
matter to your attention to prevent damage to person and property.
If you intend to mount your projector on the ceiling, we strongly recommend that you use a proper
fitting BenQ projector ceiling mount kit and that you ensure it is securely and safely installed.
• Operating the projector from the front
A
p
p
r
o
x
.
+
1
5
º
• Operating the projector from the top
A
p
p
r
o
x
.
+
1
5
º
8
Overview
If you use a non-BenQ brand projector ceiling mount kit, there is a safety risk that the projector may fall
from the ceiling due to an improper attachment through the use of the wrong gauge or length screws.
You can purchase a BenQ projector ceiling mount kit from the place you purchased your BenQ projector.
BenQ recommends that you also purchase a separate Kensington lock compatible security cable and
attach it securely to both the Kensington lock slot on the projector and the base of the ceiling mount
bracket. This will perform the secondary role of restraining the projector should its attachment to the
mounting bracket become loose.
9
Overview
Projector features
• Full HD compatible
The projector is compatible with Standard Definition TV (SDTV) 480i, 576i, Enhanced Definition
television (EDTV) 480p, 576p and High Definition TV (HDTV) 720p, 1080i/p 60Hz formats, with the
1080p format providing a true 1:1 image reproduction.
• High picture quality
The projector provides excellent picture quality due to its high resolution, excellent home theater
brightness, high contrast ratio, vivid color and rich gray-scale reproduction.
• High brightness
The projector features super high brightness to achieve excellent picture quality in ambient light
conditions, outperforming ordinary projectors.
• Vivid color reproduction
The projector features a 6-segment color wheel to produce realistic color depth and range
unattainable with lesser segment color wheels.
• Rich gray-scale
When viewed in a darkened environment, the automatic gamma control provides excellent gray-scale
display which reveals details in shadows and in night or darkened scenes.
• Wide variety of inputs and video formats
The projector supports a wide variety of inputs for connection to your video and PC equipment,
including component video, S-Video, and composite video, as well as dual HDMI, PC, and an output
trigger for connection to automated screen and environment lighting systems.
• ISF certified calibration control
To reach a higher standard of performance, the projector incorporates ISF NIGHT and ISF DAY
mode settings in its OSD menus, which requires professional calibration service from authorized ISF
installers.
• 3D function
To enjoy the 3D movies, videos, and sporting events in a more realistic way by presenting the depth
of the images through HDMI.
• Built-in speaker(s)
Built-in speaker(s) providing mixed mono audio when an audio input is connected.
• Intuitive lens shift (W1070)
The intuitive control over lens shift lever provides flexibility in setting-up your projector.
• Short throw ratio (W1080ST)
The short throw ratio projection provides 1080p picture quality with shorter projection distance.
• SmartEco
SmartEco™ technology saves lamp power consumption up to 70% depending on the content
brightness level when SmartEco mode is selected.
10
Overview
Projector exterior view
Front and upper side view
1. Control panel (See "Control panel" on
page 11 for details.)
2. Lamp cover
3. Vent (heated air exhaust)
4. Quick-release button
5. Lens cap
6. Lens shift lever
7. Focus and Zoom ring
8. Vent (cool air intake)
9. Speaker grill
10. Front IR sensor
11. Projection lens
12. HDMI ports
13. 12VDC output terminal
Used to trigger external devices such
as an electric screen or light control,
etc. Consult your dealer for how to
connect these devices.
14. Component Video inputs (RCA)
support Y/P
B/PR or Y/CB/CR video
signal
15.Mini USB port
(Used for service)
16.RGB (PC)/Component video (YPbPr/
YCbCr) signal input jack
17. RS-232 control port
Used to interface with a PC or home
theater control/automation system.
18. S-Video input (mini 4-pin DIN)
Composite Video input (RCA)
19. Audio (L/R) input jacks
20.Audio input jack
Audio output jack
21.AC Power cable inlet
22. Rear adjuster foot
23.Ceiling mount holes
24. Kensington lock slot
Rear and lower side view
2
1
3
7
4
8
6
9
2
1
3
7
4
5
5
8
9
11
10
10
11
W1070
W1080ST
12 13 15
18
21
24
22
23
16 17
19
14
20
See "Connecting with video equipment" on page 21
for connection details.
11
Overview
Controls and functions
Control panel
1. Focus ring
Adjusts the focus of the projected image.
2. Zoom ring
Adjusts the size of the image.
3. POWER indicator light
Lights up or flashes when the projector is
under operation.
4. MENU/EXIT
Turns on the On-Screen Display (OSD) menu.
Goes back to previous OSD menu, exits and
saves menu settings.
5. Top IR remote sensor
6. POWER
Toggles the projector between standby mode
and on.
7. Left/
Decreases the projector volume.
8. ECO BLANK
Used to blank the screen picture.
9. TEMPerature warning light
Lights up red if the projector's temperature
becomes too high.
10. LAMP indicator light
Indicates the status of the lamp. Lights up or
flashes when the lamp has developed a
problem.
11.AUTO
Automatically determines the best picture
timings for the displayed image.
12.Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images resulting
from an angled projection.
13. Right/
Increases the projector volume.
When the On-Screen Display (OSD) menu is
activated, the #7, #12, and #13 keys are used
as directional arrows to select the desired
menu items and to make adjustments.
14.MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
15.SOURCE
Displays the source selection bar.
2
1
4
5
6
7
8
3
10
9
11
12
14
15
13
12
12
Overview
Remote control
WIRELESS, PIP and SRS keys are not available.
1. POWER ON/OFF
Toggles the projector between on and off mode.
2. Source selection keys
Selects an input source for display.
3. MENU/EXIT
Turns on the On-Screen Display (OSD) menu.
Goes back to previous OSD menu, exits and
saves menu settings.
4. Left
Decreases the projector volume.
When the On-Screen Display (OSD) menu is
activated, the #4, #14, and #16 keys are used as
directional arrows to select the desired menu
items and to make adjustments.
5. MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
6. ECO BLANK
Used to blank the screen picture.
7. ASPECT
Selects the display aspect ratio.
8. Picture quality adjustment keys
These function keys perform the same tasks as
specified in the OSD menu. For details, please
refer to "Fine-tuning the picture quality" on
page 31.
9. FINE TUNE
Displays the "Color Temperature Fine
Tu n i n g " menu. For details, please refer to
"Setting a preferred color temperature" on
page 33.
10.3D/INVERT
Enters the "3D" menu directly and toggles the
invert function between on and off.
11.MUTE
Toggles projector audio between on and off.
12.FREEZE
Freezes the projected image.
13.LIGHT
The LED backlight lights up and stays on for
approximately 10 seconds when pressing any
key on the remote control. Pressing any other
keys within the 10-second window turns off the
LED backlight.
14.Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images resulting
from an angled projection.
When the On-Screen Display (OSD) menu is
activated, the #4, #14, and #16 keys are used as
directional arrows to select the desired menu
items and to make adjustments.
15.AUTO
Automatically determines the best picture
timings for the displayed image.
16. Right
Increases the projector volume.
When the On-Screen Display (OSD) menu is
activated, the #4, #14, and #16 keys are used as
directional arrows to select the desired menu
items and to make adjustments.
17.SOURCE
Displays the source selection bar. (WIRELESS
is not available)
18.TEST
Displays the test pattern.
1
2
3
6
7
9
11
12
10
15
17
18
16
13
14
14
4
5
8
13
Positioning your projector
Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation locations.
Your room layout or personal preference will dictate which installation location you select. Take into
consideration the size and position of your screen, the location of a suitable power outlet, as well as the
location and distance between the projector and the rest of your equipment.
*To set the projector position:
1. Press MENU/EXIT on the projector or remote control and then press / until the System Setup : Basic menu is
highlighted.
2. Press / to highlight Projector Position and press / until the correct position is selected.
1. Front:
Select this location with the projector placed near
the floor in front of the screen. This is the most
common way to position the projector for quick
setup and portability.
3. Rear:
Select this location with the projector placed near
the floor behind the screen.
Note that a special rear projection screen is
required.
*Set Rear after you turn the projector on.
2. Front Ceiling:
Select this location with the projector suspended
from the ceiling in front of the screen.
Purchase the BenQ Projector Ceiling Mount Kit
from your dealer to mount your projector on the
ceiling.
*Set Front Ceiling after you turn the projector
on.
4. Rear Ceiling:
Select this location with the projector suspended
from the ceiling behind the screen.
Note that a special rear projection screen and the
BenQ Projector Ceiling Mount Kit are required for
this installation location.
*Set Rear Ceiling after you turn the projector
on.
14
Positioning your projector
Obtaining a preferred projected image size
The distance from the projector lens to the screen, the zoom setting, and the video format each factors
in the projected image size.
The projector should always be placed horizontally level (like flat on a table), and positioned directly
perpendicular 90° right-angle square) to the screen. This prevents image distortion caused by angled
projections (or projecting onto angled surfaces). If the projector is mounted on a ceiling, it must be
mounted upside-down.
If the projector is positioned further away from the screen, the projected image size increases, and the
vertical offset also increases proportionately.
When determining the positions of the screen and projector, you will need to account for both the
projected image size and the vertical offset dimension, which are directly proportional to the projection
distance.
This projector is equipped with a movable lens. See "Shifting the projection lens vertically" on page 20 for
details. You can see the diagrams on pages 16 and 18 for the vertical offset values in the dimension tables
that are measured when the lens is shifted fully up or down.
Lens shift is only available on W1070.
How to determine the position of the projector for a given screen size
1. Determine the aspect ratio of your screen, 16:9 or 4:3?
2. Refer to the table and find the closest match to your screen size in the left columns labelled "Screen
dimensions". Using this value, look across this row to the right to find the corresponding average
distance from screen value in the column labelled "Average". This is the projection distance.
3. Decide the exact position of your projector according to the position of your screen and the
adjustable lens shift range.
<Example>
W1070: If you are using a 120-inch, 4:3-aspect-ratio screen, please refer to "The screen aspect ratio is 4:3
and the projected picture is 16:9". The average projection distance is 3207 mm.
How to determine the recommended screen size for a given distance
This method can be used for situations where you have purchased this projector and would like to know
what screen size will fit in your room.
The maximum screen size is limited by the physical space available in your room.
1. Determine the aspect ratio of your screen, 16:9 or 4:3?
2. Measure the distance between the projector and where you want to position the screen. This is the
projection distance.
3. Refer to the table and find the closest match to your measurement in the average distance from
screen column labelled "Average". Check that your measured distance is between the min. and max.
distances listed on either side of the average distance value.
4. Using this value, look across that row to the left to find the corresponding screen diagonal listed in
that row. That is the projected image size of the projector at that projection distance.
<Example>
W1070: If you have a 16:9-aspect-ratio screen and your measured projection distance was 4000 mm,
please refer to "The screen aspect ratio is 16:9 and the projected picture is 16:9". The closest match in
the "Average" column is 4076 mm. Looking across this row shows that a 140-inch screen is required.
Checking the min. and max. projection distance values in the columns of "Projection distance <D> [mm]"
on page 16 indicates that the 4000 mm measured projection distance will also fit the 130 and 150-inch
15
Positioning your projector
size screens. The projector can be adjusted (using the zoom control) to display on these different screen
sizes at the projection distance. Be aware that these different screens have different vertical offset values.
If you place the projector in a different position (to that recommended), you will have to tilt it down or
up to center the image on the screen. In these situations, some image distortion will occur. Use the
Keystone function to correct the distortion. See "Correcting picture distortion" on page 29 for details.
16
Positioning your projector
Projection dimensions
Installation for a 16:9 ratio screen
W1070
The screen aspect ratio is 16:9 and the projected picture is 16:9
The above numbers are approximate and may be slightly different from the actual measurements. Only the
recommended screen sizes are listed. If your screen size is not in the table above, please contact your dealer
for assistance.
Screen dimensions Projection distance <D> [mm]
Lowest/Highest
lens position
<E> [mm]
Diagonal
<A>
[inch
(mm)]
Height
<B>
[mm]
Width
<C>
[mm]
Min distance
(with max
zoom)
Average
Max distance
(with min
zoom)
40 (1016) 498 886 1013 1165 1316 25
50 (1270) 623 1107 1266 1456 1646 31
60 (1524) 747 1328 1519 1747 1975 37
70 (1778) 872 1550 1772 2038 2304 44
80 (2032) 996 1771 2025 2329 2633 50
90 (2286) 1121 1992 2278 2620 2962 56
100 (2540) 1245 2214 2532 2911 3291 62
110 (2794) 1370 2435 2785 3203 3620 68
120 (3048) 1494 2657 3038 3494 3949 75
130 (3302) 1619 2878 3291 3785 4278 81
140 (3556) 1743 3099 3544 4076 4608 87
150 (3810) 1868 3321 3797 4367 4937 93
160 (4064) 1992 3542 4051 4658 5266 100
170 (4318) 2117 3763 4304 4949 5595 106
180 (4572) 2241 3985 4557 5241 5924 112
190 (4826) 2366 4206 4810 5532 6253 118
200 (5080) 2491 4428 5063 5823 6582 125
235 (5969) 2926 5202 5949 6842 7734 146
<A>
<B>
<C>
<E>
<D>
<F>
<G>
Floor Installation
<F>: Screen <G>: Center of lens
<B>
<A>
<C>
<F>
<G>
<D>
<E>
Ceiling Installation
<F>: Screen <G>: Center of lens
17
Positioning your projector
W1080ST
The screen aspect ratio is 16:9 and the projected picture is 16:9
The above numbers are approximate and may be slightly different from the actual measurements. Only the
recommended screen sizes are listed. If your screen size is not in the table above, please contact your dealer
for assistance.
Screen dimensions Projection distance <D> [mm]
Lowest/Highest
lens position
<E> [mm]
Diagonal
<A>
[inch
(mm)]
Height
<B>
[mm]
Width
<C>
[mm]
Min distance
(with max
zoom)
Average
Max distance
(with min
zoom)
40 (1016) 498 886 609 670 731 12
50 (1270) 623 1107 761 837 913 16
60 (1524) 747 1328 913 1005 1096 19
70 (1778) 872 1550 1065 1172 1279 22
80 (2032) 996 1771 1218 1339 1461 25
90 (2286) 1121 1992 1370 1507 1644 28
100 (2540) 1245 2214 1522 1674 1826 31
110 (2794) 1370 2435 1674 1842 2009 34
120 (3048) 1494 2657 1826 2009 2192 37
130 (3302) 1619 2878 1979 2177 2374 40
140 (3556) 1743 3099 2131 2344 2557 44
150 (3810) 1868 3321 2283 2511 2740 47
160 (4064) 1992 3542 2435 2679 2922 50
170 (4318) 2117 3763 2588 2846 3105 53
180 (4572) 2241 3985 2740 3014 3288 56
190 (4826) 2366 4206 2892 3181 3470 59
200 (5080) 2490 4428 3044 3349 3653 62
250 (6350) 3113 5535 3805 4186 4566 78
300 (7620) 3736 6641 4566 5023 5479 93
18
Positioning your projector
Installation for a 4:3 ratio screen
The illustrations and table below are provided for those users who already have 4:3 aspect ratio screens
or intend to purchase 4:3 aspect ratio screens to view 16:9 ratio projected images.
W1070
The screen aspect ratio is 4:3 and the projected picture is 16:9
The above numbers are approximate and may be slightly different from the actual measurements. Only the
recommended screen sizes are listed. If your screen size is not in the table above, please contact your dealer
for assistance.
<A>
<B>
<H>
<C>
<E>
<D>
<F>
<G>
Floor Installation
<F>: Screen <G>: Center of lens
<A>
<B>
<H>
<C>
<E>
<D>
<F>
<G>
Ceiling Installation
<F>: Screen <G>: Center of lens
Screen dimensions
Projection distance <D>
[mm]
Lowest/
Highest
lens
position
<E>
[mm]
Image
height <H>
[mm]
Diagonal
<A>
[inch (mm)]
Height
<B>
[mm]
Width
<C>
[mm]
Min
distance
(with
max
zoom)
Average
Max
distance
(with min
zoom)
40 (1016) 610 813 929 1069 1208 23 457
50 (1270) 762 1016 1162 1336 1510 29 572
60 (1524) 914 1219 1394 1603 1813 34 686
70 (1778) 1067 1422 1627 1871 2115 40 800
80 (2032) 1219 1626 1859 2138 2417 46 914
90 (2286) 1372 1829 2091 2405 2719 51 1029
100 (2540) 1524 2032 2324 2672 3021 57 1143
110 (2794) 1676 2235 2556 2940 3323 63 1257
120 (3048) 1829 2438 2788 3207 3625 69 1372
130 (3302) 1981 2642 3021 3474 3927 74 1486
140 (3556) 2134 2845 3253 3741 4229 80 1600
150 (3810) 2286 3048 3486 4008 4531 86 1715
160 (4064) 2438 3251 3718 4276 4833 91 1829
170 (4318) 2591 3454 3950 4543 5135 97 1943
180 (4572) 2743 3658 4183 4810 5438 103 2057
190 (4826) 2896 3861 4415 5077 5740 109 2172
200 (5080) 3048 4064 4647 5345 6042 114 2286
19
Positioning your projector
W1080ST
The screen aspect ratio is 4:3 and the projected picture is 16:9
The above numbers are approximate and may be slightly different from the actual measurements. Only the
recommended screen sizes are listed. If your screen size is not in the table above, please contact your dealer
for assistance.
Screen dimensions
Projection distance <D>
[mm]
Lowest/
Highest
lens
position
<E>
[mm]
Image
height <H>
[mm]
Diagonal
<A>
[inch (mm)]
Height
<B>
[mm]
Width
<C>
[mm]
Min
distance
(with
max
zoom)
Average
Max
distance
(with min
zoom)
40 (1016) 457 813 559 615 671 11 290
50 (1270) 572 1016 699 768 838 14 363
60 (1524) 686 1219 838 922 1006 17 435
70 (1778) 800 1422 978 1076 1174 20 508
80 (2032) 914 1626 1118 1229 1341 23 581
90 (2286) 1029 1829 1257 1383 1509 26 653
100 (2540) 1143 2032 1397 1537 1676 29 726
110 (2794) 1257 2235 1537 1690 1844 31 798
120 (3048) 1372 2438 1676 1844 2012 34 871
130 (3302) 1486 2642 1816 1998 2179 37 944
140 (3556) 1600 2845 1956 2151 2347 40 1016
150 (3810) 1715 3048 2096 2305 2515 43 1089
160 (4064) 1829 3251 2235 2459 2682 46 1161
170 (4318) 1943 3454 2375 2613 2850 49 1234
180 (4572) 2057 3658 2515 2766 3018 51 1306
190 (4826) 2172 3861 2654 2920 3185 54 1379
200 (5080) 2286 4064 2794 3074 3353 57 1452
250 (6350) 2858 5080 3493 3842 4191 71 1815
300 (7620) 3429 6096 4191 4610 5029 86 2177
20
Positioning your projector
Shifting the projection lens vertically
The vertical lens shift control provides flexibility for installing your projector. It allows the projector to be
positioned slightly above or below the top level of the projected images.
The lens shift (offset) is expressed as a percentage of the projected image height. It is measured as an
offset from the projected image's vertical center. You can use the lever to shift the projection lens
upwards or downwards within the allowable range depending on your desired image position.
To use the lens shift lever:
1. Release the lever by turning it counterclockwise.
2. Move the lever to adjust the projected image position.
3. Lock the lever by turning it clockwise.
• Please do not over-tighten the lever.
• Lens shift adjustment will not result in a degraded picture quality. In the unlikely event that the image
distortion is produced, see "Adjusting the projected image" on page 29 for details.
• When the screen position is fixed
• When the projector position is fixed
100%
10%
30%
DOWN
LENS SHIFT
UP
Screen
Projector
110%
130%
120%
DOWN
LENS SHIFT
UP
21
Positioning your projector
Connecting with video equipment
You can connect the projector to any type of video equipment, such as a VCR, DVD player, Blu-ray player,
digital tuner, cable or satellite decoder, video game console or digital camera. You can also connect it to a
desktop or laptop PC or Apple Macintosh system. You need only connect the projector to a source
device using just one of the connecting methods, however each provides a different level of video quality.
The method you choose will most likely depend upon the availability of matching terminals on both the
projector and the Video source device as described below:
Preparations
When connecting a signal source to the projector, be sure to:
1. Turn off all equipment before making any connections.
2. Use only the correct type cables for each source with proper type plugs.
3. Ensure that all cable plugs are firmly fitted to the equipment jacks.
Note that all cables shown in the following connection diagrams may not be supplied with the projector (See
"Shipping contents" on page 6 for details). Most cables are commercially available from electronics stores.
Connecting HDMI devices
HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between
compatible devices like DTV tuners, DVD players, Blu-ray players and displays over a single cable. It
provides pure digital viewing and listening experience. You should use an HDMI cable when making
connection between the projector and HDMI devices.
Te r m i n a l
name
Terminal appearance Reference Picture quality
HDMI
"Connecting HDMI devices" on
page 21
Best
Component
Video
"Connecting component-video
devices" on page 22
Better
S-Video
"Connecting S-Video or video devices"
on page 22
Good
Video
"Connecting S-Video or video devices"
on page 22
Normal
PC (D-SUB)
"Connecting a computer" on page 23
Better
HDMI cable
HDMI device: DVD player, digital tuner, etc.
To make sure you select a correct input source
type for the HDMI signal, see "HDMI Settings" on
page 45 for details.
22
Positioning your projector
Connecting component-video devices
Be sure to match the corresponding colors between the cables and the terminals. The RCA type
component video jacks are provided for connection to video output devices. You should also connect the
separate audio cable to a suitable audio amplifier.
Connecting S-Video or video devices
You need only connect S-Video or composite Video cable from the same device, never both at the same
time. You should also connect the separate audio cable to a suitable audio amplifier.
• If you have already made a Component Video connection between the projector and the video source
device, you need not connect to this device again using an S-Video or composite Video connection as this
makes an unnecessary second connection of poorer picture quality. You need only connect using a
composite Video connection if both Component Video and S-Video are not supplied on the video source
device (for example, with some analog video cameras).
• If the selected video image is not displayed after the projector is turned on and the correct video source
has been selected, please check that the video source device is turned on and operating correctly. Also
check that the signal cables have been connected correctly.
AV equipment: DVD player, digital
tuner, etc.
From audio output
terminals
To a u d i o i n p u t
terminals
Component video cable
From audio output
terminals
To audio input terminals
S-Video cable
Video cable
or
AV equipment
23
Positioning your projector
Connecting a computer
Connect the projector to a computer with a VGA cable.
Many laptops do not turn on their external video ports when connected to a projector. Usually a key
combination like Fn + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled
CRT/LCD or a function key with a monitor symbol on the laptop. Press Fn and the labeled function key
simultaneously. Refer to your laptop
's documentation to discover your laptop's key combination.
VGA cable
From audio
output terminal
To audio input terminals
Laptop or desktop
computer
24
Using the projector
Using the projector
Preparations
1. Plug in and turn all of the connected equipment on.
2. If not already in, plug the supplied power cable into the AC inlet on the
rear of the projector.
3. Plug the power cable into a wall power outlet and turn the wall switch
on.
Please use the original accessories (e.g. power cable) only with the device to
avoid possible dangers such as electric shock and fire.
Turning the projector on
Follow the steps below.
1. Make sure the Power light is orange after power has been applied.
2. Press and hold POWER () on the projector or on the remote control to turn the projector
on. As soon as the lamp lights up, a "Power On Tone" will be heard. The POWER indicator light
flashes green and stays green when the projector is on.
To turn off the ring tone, see "Turning off the Power On/Off Ring Tone" on page 35 for details.
3. The fans will start operating, and a start-up image displays on the screen for a few seconds while it
warms up.
The projector will not respond to further commands while it is warming up.
4. If you are prompted for a password, press the arrow keys to enter a six-digit password. See "Utilizing
the password function" on page 27 for details.
5. "Source Searching..." will be displayed on the screen before the projector identifies the input source.
This message will remain on the screen until a valid signal is detected. See "Selecting an input source"
on page 25 for details.
6. If the horizontal frequency of the input source exceeds the range of the projector, the message "No
Signal" will be displayed on the screen. This message will remain on-screen until you change the input
source to an appropriate one.
25
Using the projector
Selecting an input source
The projector can be connected to multiple equipment at the same time.
When the projector is first turned on, it will attempt to reconnect with
the input source which was in use when the projector was last shut
down.
To select the video source:
• Using the remote control or projector
1. Press SOURCE on the projector or remote control. A source
selection bar displays.
2. Press / until your desired signal is selected and press MODE/
ENTER.
• Using the OSD menu
1. Press MENU/EXIT and then press / until the System Setup : Basic menu is highlighted.
2. Press to highlight Input Source and press MODE/ENTER. The source selection bar displays.
3. Press / repeatedly until your desired signal is selected and press MODE/ENTER.
Once detected, the selected source information will display on the screen for seconds. If there are
multiple pieces of equipment connected to the projector, you can go back to the source selection bar
again to search for other signals.
You can also rename the source:
1. Press MENU/EXIT and then press / until the System Setup : Basic menu is highlighted.
2. Press to highlight Source Rename and press MODE/ENTER. The Source Rename page
displays.
3. Press / / / until your desired character is selected and press MODE/ENTER.
• If you want the projector to automatically search for the signals, select On in the System Setup :
Basic > Auto Source Search menu.
Fine-tuning the image size and clarity
NOTE: When
automatically
searching for a
valid input source,
the projector
cycles through
the available
signals following
the sequence
from top to
bottom as the
source selection
bar shows.
HDMI 1
HDMI 2
Video
S-Video
Component
PC
1. Adjust the projected picture to the size
that you need using the zoom ring.
2. Sharpen the picture by rotating the focus
ring.
26
Using the projector
Using the menus
The projector is equipped with multilingual On-Screen Display (OSD) menus for making various
adjustments and settings.
Below is the overview of the OSD menu.
To use the OSD menus, please set the OSD menu to your familiar language.
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock, such as the
Kensington lock, to secure the projector. You can locate a Kensington lock slot on the projector. See item
24 on page 10 for details.
A Kensington security cable lock is usually a combination of key(s) and the lock. Refer to the lock's
documentation for finding out how to use it.
Preset Mode
User Mode Management
Brightness
Contrast
Tint
Sharpness
Lamp Power
Picture
3
S-Video
Standard
Exit
Current input source
Main menu icon
Main menu
Sub-menu
Highlight
Press MENU/EXIT to go
back to the previous page or
to exit.
Status
50
50
50
0
Color
Color Temperature
Advanced...
Normal
SmartEco
Reset Picture Settings
1. Press MENU/EXIT on the projector or remote
control to turn the OSD menu on.
2. Use / to highlight the System Setup : Basic
menu.
3. Press to highlight Language and press
MODE/ENTER.
4. Press / / / to select a preferred
language.
5. Press MENU/EXIT twice* on the
projector or remote control to leave and
save the settings.
*The first press leads you back to the main
menu and the second press closes the OSD
menu.
Preset Mode
User Mode Management
Brightness
Contrast
Tint
Sharpness
Picture
S-Video
Standard
Exit
Color
3
50
50
50
0
Lamp Power
Color Temperature
Advanced...
Normal
SmartEco
Reset Picture Settings
Language
Splash Screen
Projector Position
Auto Off
Sleep Timer
Menu Settings
Input Source
System Setup : Basic
S-Video
BenQ
Exit
Disable
Disable
Off
Front
Source Rename
Language
Splash Screen
Projector Position
Auto Off
Sleep Timer
Menu Settings
Input Source
System Setup : Basic
S-Video
BenQ
Exit
Disable
Disable
Off
Front
ENTER
Source Rename
27
Using the projector
Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an option for setting
up password security. The password can be set through the On-Screen Display (OSD) menu. Once the
password is set and this function is selected, the projector is password-protected. Users who do not
know the correct password can not use the projector.
You will be inconvenienced if you activate the password functionality and subsequently forget the password.
Print out this manual (if necessary) and write the password you used in this manual, and keep the manual in
a safe place for later recall.
Setting a password
Once a password has been set and activated, the projector cannot be used unless the correct password is
entered every time the projector is started.
1. Press MENU/EXIT on the projector or remote control and then
press / until the System Setup : Advanced menu is
highlighted.
2. Press to highlight Password and press MODE/ENTER. The
Password page displays.
3. Highlight Change Password and press MODE/ENTER. The
Input Password page displays.
4. As the picture indicates, the four arrow keys ( , , , )
respectively represent 4 digits (1, 2, 3, 4). According to the password you desire to set, press the
arrow keys on the remote control or projector to enter six digits for the password.
Confirm the new password by re-entering the new password.
Once the password is set, the OSD menu returns to the Password page.
IMPORTANT: The digits being input will display as asterisks on-screen. Write your selected password
down here in this manual in advance or right after the password is entered so that it is available to you
should you ever forget it.
Password: __ __ __ __ __ __
5. Highlight Power On Lock and then press / to select On.
6. Confirm the current password.
7. To leave the OSD menu, press MENU/EXIT.
If you forget the password
If the password function is activated, you will be asked to enter the six-
digit password every time you turn on the projector. If you enter the
wrong password, the password error message as pictured to the right
displays lasting for three seconds, and the Input Password page
follows. You can retry by entering another six-digit password, or if you
did not record the password in this manual, and you absolutely do not
remember it, you can use the password recall procedure. See "Entering
the password recall procedure" on page 28 for details.
If you enter an incorrect password 5 times in succession, the projector
will automatically shut down in a short time.
Input New Password
Back
Password Error
Please try again.
28
Using the projector
Entering the password recall procedure
1. Make sure the Input Password page displays on screen. Press and
hold AUTO on the projector or remote control for 3 seconds. The
projector will display a coded number on the screen.
2. Write down the number and turn off your projector.
3. Seek help from the local BenQ service center to decode the number.
You may be required to provide proof of purchase documentation to
verify that you are an authorized user of the projector.
Changing the password
1. Press MENU/EXIT on the projector or remote control and then press / until the System
Setup : Advanced menu is highlighted.
2. Press / to highlight Password and press MODE/ENTER. The Password page displays.
3. Highlight Change Password and press MODE/ENTER. The Input Current Password page
displays.
4. Enter the old password.
• If the password is correct, the message "Input New Password" displays.
• If the password is incorrect, the password error message displays lasting for three seconds, and
the message "Input Current Password" displays for your retry. You can either press MENU/
EXIT to cancel the change or try another password.
5. Enter a new password.
IMPORTANT: The digits being input will display as asterisks on-screen. Write your selected password
down here in this manual in advance or right after the password is entered so that it is available to you
should you ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
6. Confirm the new password by re-entering the new password.
7. You have successfully assigned a new password to the projector. Remember to enter the new
password next time the projector is started.
8. To leave the OSD menu, press MENU/EXIT.
Disabling the password function
To disable password protection, go back to the System Setup : Advanced > Password > Password
menu. Highlight Power On Lock and then press / to select Off. The message "Input Current
Password" displays. Enter the current password.
• If the password is correct, the OSD menu returns to the Password page with "Off" shown in
the row of Power On Lock. You will not have to enter the password next time when turning
on the projector.
• If the password is incorrect, the password error message displays lasting for three seconds, and
the message "Input Current Password" displays for your retry. You can either press MENU/
EXIT to cancel the change or try another password.
Note that though the password function is disabled, you need to keep the old password in hand should
you ever need to re-activate the password function by entering the old password.
Please write down the recall code,
and contact BenQ
Customer Center.
Recall code:
XXX XXX XXX XXX
RECALL PASSWORD
Exit
29
Using the projector
Adjusting the projected image
Adjusting the projection angle
The projector is equipped with 1 quick-release adjuster foot and 1
rear adjuster foot. These adjusters change the image height and
projection angle. To adjust the projector:
1. Press the quick-release button and lift the front of the projector.
Once the image is positioned where you want it, release the
quick-release button to lock the foot in position.
2. Screw the rear adjuster foot to fine-tune the horizontal angle.
To retract the foot, hold up the projector while pressing the quick-release button, then slowly lower the
projector. Screw the rear adjuster foot in a reverse direction.
If the screen and the projector are not perpendicular to each other, the projected image becomes vertical
trapezoidal. To correct this problem, see "Correcting picture distortion" on page 29 for details.
Correcting picture distortion
Keystoning occurs when the projector is not perpendicular to the screen and is where the projected
picture displays visible as a trapezoid shape like either of the following:
• Two parallel sides (left and right, or top and bottom) but is noticeably wider on either side.
• No parallel sides.
To correct the picture’s shape, you can perform the following steps.
1. Adjust the projection angle. Move the projector to be in front of the center of the screen with the
center of the lens level with the screen.
2. If the picture is stilled distorted, or the projector is unable to be positioned as described above, you
will need to manually correct the picture.
• Using the remote control or projector
i. Press one of the Arrow/Keystone keys on the remote control or projector (Up / , Down /
) to display the Keystone page.
ii. See step iii below for further operation.
• Using the OSD menu
i. Press MENU/EXIT and then press / until the Display menu is highlighted.
ii. Press to highlight Keystone and press MODE/ENTER. The keystone correction page
displays.
iii. Press the key whose keystone icon is opposite to the shape of the projected picture. Continue
pressing the same key or press the other keys until you are satisfied with the shape.
The values on the lower portion of the page change while pressing. When the values reach their
maximum or minimum with repeated key presses, the picture’s shape will stop changing. You will
not be able to change the picture further in that direction.
2
1
Press
/ .
Press
/ .
30
Using the projector
Using the preset and user modes
Selecting a preset mode
The projector is preset with several pre-defined picture modes so that you can choose one to suit your
operating environment and input source picture type.
To select a preset mode that suits your need:
1. Press MENU/EXIT and then press / until the Picture menu is highlighted.
2. Press to highlight Preset Mode.
3. Press / until your desired mode is selected.
These modes consist of preset values suitable for various projection situations as described below:
• Cinema: With well-balanced color saturation and contrast with a low brightness level, this is most
suitable for enjoying movies in a totally dark environment (as you would find in a commercial cinema).
• Dynamic: Maximizes the brightness of the projected image. This mode is suitable for environments
where extra-high brightness is required, such as using the projector in well lit rooms.
• Standard: It is slightly brighter than Cinema mode, and suitable for use in rooms where there is a
small amount of ambient light.
• 3D: It is optimized to bring up 3D effects when watching 3D contents.
This mode is only available when 3D function is enabled.
• User 1/User 2/User 3: Recalls the customized settings. See "Setting the User 1/User 2/User 3
mode" on page 30 for details.
User 3 is only available when 3D mode is enabled.
Fine-tuning the selected picture mode
The pre-defined picture mode settings can be altered via the available items shown in the Picture menus.
To fine-tune the picture mode:
1. Press MENU/EXIT and then press / until the Picture menu is highlighted.
2. Press to highlight the item you want to adjust and press / to set your desired value. Your
selection is automatically stored in the projector and associated with that input source.
See "Fine-tuning the picture quality" on page 31 and "Advanced picture quality controls" on page 33
for details.
Each time you change the picture mode, the projector also changes the setting to the one which was last
set for that particular picture mode on that particular input. If you change the input source, the most
recently used picture mode and settings for that input and resolution will be restored.
Setting the User 1/User 2/User 3 mode
There are three user-definable modes if the current available picture modes are not suitable for your
need. You can use one of the picture modes (except the selected User mode) as a starting point and
customize the settings.
1. In the Picture menu, highlight Preset Mode and press / to select User 1, User 2, or User 3
mode.
2. Press to highlight User Mode Management.
This function is only available when User 1, User 2, or User 3 mode is selected up in the Preset
Mode sub-menu item.
3. Press MODE/ENTER to display the User Mode Management page.
4. Press to highlight Reference Mode and press MODE/ENTER.
31
Using the projector
5. Press to highlight a picture mode that is closest to your need and press MODE/ENTER and
MENU/EXIT to go back to the User Mode Management page.
6. Here you can rename the User 1, User 2, or User 3 mode by press to highlight Rename User
Mode and press MODE/ENTER. The Rename User Mode page displays.
7. Press / / / until your desired character is selected and press MODE/ENTER.
8. Press MENU/EXIT to go back to the main menu once you are done.
9. Press to select a sub-menu item to be changed and adjust the value with / . See "Fine-tuning
the picture quality" on page 31 and "Advanced picture quality controls" on page 33 for details.
10. When all settings have been done, press MENU/EXIT to save and leave the settings.
Resetting the picture mode
All of the adjustments you’ve done in the Picture menus can be returned to the factory preset values
with a key press on the highlight of Reset.
To reset the picture mode to the preset factory values:
1. In the Picture menu, highlight Preset Mode and press / to select the picture mode (including
User 1, User 2, or User 3) you want to reset.
2. Press to highlight Reset Picture Settings and press MODE/ENTER. The confirmation message
displays.
3. Press / to highlight Reset and press MODE/ENTER. The picture mode will return to the
factory preset settings.
4. Repeat steps 1-3 if you want to reset other picture modes.
Do not to be confused with the Reset Picture Settings function here with the Reset All Settings in the
System Setup : Advanced menu. The Reset All Settings function returns most of the settings to the factory
preset values system wide. See "Reset All Settings" on page 46 for details.
Fine-tuning the picture quality
No matter what picture mode you have selected, you are able to fine-tune those settings to fit every
presentation purpose. Those adjustments will be saved to the preset mode you are at when you exit the
OSD menu.
Adjusting Brightness
Highlight Brightness in the Picture menu and adjust the
control.
The higher the value, the brighter the picture. And the
lower the setting, the darker the picture. Adjust this
control so the black areas of the picture appear just as black and that detail in the dark areas is visible.
Adjusting Contrast
Highlight Contrast in the Picture menu and adjust the
control.
The higher the value, the greater the contrast. Use this to
set the peak white level after you have previously adjusted
the Brightness setting to suit your selected input and viewing environment.
Adjusting Color
Highlight Color in the Picture menu and adjust the values by pressing / on the projector or
remote control.
30 50 70
30 50
70
32
Using the projector
Lower setting produces less saturated colors; setting to the minimum value makes the image black and
white. If the setting is too high, colors on the image will be overpowering, which makes the image
unrealistic.
Adjusting Tint
Highlight Tint in the Picture menu and adjust the values by pressing / on the projector or remote
control.
The higher the value, the more reddish the picture becomes. The lower the value, the more greenish the
picture becomes.
Adjusting Sharpness
Highlight Sharpness in the Picture menu and adjust the
control.
The higher the value, the sharper the picture becomes. The
lower the value, the softer the picture becomes.
The Brightness, Color, Contrast, Sharpness, and Tint functions can also be accessible by pressing
BRIGHTNESS, COLOR, CONTRAST, SHARP, and TINT on the remote control to display the
adjustment bar and then you can press / to adjust the values.
Selecting a color temperature*
Highlight Color Temperature in the Picture menu and select a preferred setting by pressing /
on the projector or remote control.
There are several color temperature settings available.
1. Lamp Native: With the lamp’s original color temperature and higher brightness. This setting is
suitable for environments where high brightness is required, such as projecting pictures in well lit
rooms.
2. Warm: Makes pictures appear reddish white.
3. Normal: Maintains normal colorings for white.
4. Cool: Makes pictures appear bluish white.
*About color temperatures:
There are many different shades that are considered to be "white" for various purposes. One of the common
methods of representing white color is known as the “color temperature”. A white color with a low color
temperature appears to be reddish white. A white color with a high color temperature appears to have more
blue in it.
357
33
Using the projector
Advanced picture quality controls
There are more advanced functions in the Picture > Advanced... and Display menus to be adjusted to
your preference. To save the settings, just press MENU/EXIT to leave the OSD menu.
Setting Black Level
Highlight Black Level in the Picture > Advanced... menu and press / on the projector or
remote control to select 0 IRE or 7.5 IRE.
The grayscale video signal is measured in IRE units. In some areas which use NTSC TV standard, the
grayscale is measured from 7.5 IRE (black) to 100 IRE (white); however, in other areas where PAL
equipment or Japanese NTSC standards are used, the grayscale is measured from 0 IRE (black) to 100 IRE
(white). We suggest that you check the input source to see if it is with 0 IRE or 7.5 IRE, then select
accordingly.
Controlling image clarity
You may have static or noisy projected pictures.
To achieve better picture clarity:
1. Highlight Clarity Control in the Picture > Advanced... menu and press MODE/ENTER on the
projector or remote control to display the Clarity Control page.
2. Press to select Noise Reduction and press / to set the desired value.
• Noise Reduction: Reduces electrical image noise caused by different media players. The higher
the setting, the less the noise.
Setting a preferred color temperature
To set a preferred color temperature:
1. Highlight Color Temperature Fine Tuning in the Picture > Advanced... menu and press
MODE/ENTER. The Color Temperature Fine Tuning page displays.
2. Press / to highlight the item you want to change and adjust the values by pressing / .
• Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue.
• Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue.
3. To save and leave the settings, press MENU/EXIT.
Selecting a Gamma setting
Highlight Gamma Selection in the Picture > Advanced... menu and select a preferred setting by
pressing / on the projector or remote control.
Gamma refers to the relationship between input source and picture brightness.
• Gamma 1.6/1.8/2.0/BenQ
Select these values according to your preference.
• Gamma 2.2
Increases the average brightness of the picture. Best for a lit environment, meeting room or family
room.
• Gamma 2.4/2.5
Best for viewing movies in a darkened environment.
• Gamma 2.6/2.8
34
Using the projector
Best for viewing movies which are mostly composed of dark scenes.
Adjusting Brilliant Color
Highlight Brilliant Color in the Picture > Advanced... menu and select On by pressing / on the
projector or remote control.
This feature utilizes a new color-processing algorithm and system level enhancements to enable higher
brightness while providing truer, more vibrant colors in picture. When set to "Off", Brilliant Color is
disabled.
Color Management
In most installation situations, color management will not be necessary, such as in classroom, meeting
room, or lounge room situations where lights remain on, or where building external windows allow
daylight into the room.
Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or
home theaters, should color management be considered. Color management provides fine color control
adjustment to allow for more accurate color reproduction, should you require it.
Proper color management can only be achieved under controlled and reproducible viewing conditions.
You will need to use a colorimeter (color light meter), and provide a set of suitable source images to
measure color reproduction. These tools are not provided with the projector, however, your projector
supplier should be able to provide you with suitable guidance, or even an experienced professional
installer.
The Color Management provides six sets (RGBCMY) of colors to be adjusted to favorite colors.
When you select each color, you can independently adjust its color range and saturation according to
your preference.
To adjust and store the settings:
1. In the Picture > Advanced... menu, highlight Color Management
and press MODE/ENTER. The Color Management page displays.
2. Highlight Primary Color and press / to select a color from
among Red, Green, Blue, Cyan, Magenta and Yellow.
3. Press to highlight Hue and press /
to select its range. Increase in
the range will include colors consisted of more proportions of its two
adjacent colors.
Please refer to the illustration to the right for how the colors relate
to each other. For example, if you select Red and set its range at 0,
only pure red is selected. Increasing its range will include both the red
color close to yellow and red color close to magenta.
4. Press to highlight Gain and adjust its values to your preference by pressing / . The contrast
level of the primary color you select will be affected. Every adjustment made will reflect to the image
immediately.
5. Press to highlight Saturation and adjust its values to your preference by pressing / . Every
adjustment made will reflect to the image immediately.
For example, if you select Red and set its value at 0, only the saturation of pure red will be affected.
High Brightness
Low Contrast
Low Brightness
High Contrast
1.6
1.8 2.0 2.2 2.4 2.5 2.6 2.8
Red
Yellow
Green
Cyan
Magenta
Blue
35
Using the projector
Saturation is the amount of that color in a video picture. Lower settings produce less saturated
colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that
color will be overpowering and unrealistic.
6. To leave and save the settings, press MENU/EXIT.
Setting Film Mode
Highlight Film Mode in the Display menu and select On by pressing / on the projector or remote
control.
This feature helps improve picture quality when projecting composite or S-video image from a film-
sourced DVD or Blu-ray Disc.
Setting 3D Comb Filter
Highlight 3D Comb Filter in the Display menu and select On by pressing / on the projector or
remote control.
This feature separates composite signal to Y (brightness) signal and C (color) signal, and can help produce
clearer and sharper images with correct colors in place.
This function is only available when a composite or S-video signal is selected.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have
made a correct connection to the projector audio input. See "Connecting with video equipment" on
page 21 for how the audio input is connected.
Muting the sound
To temporarily turn off the sound:
1. Press MENU/EXIT and then press / until the Audio Setup menu is highlighted.
2. Press to highlight Mute and press / to select On.
If available, you can also press MUTE on the remote control to toggle projector audio between on and off.
Adjusting the sound level
To adjust the sound level, press / on the projector or remote control, or:
1. Repeat steps 1 above.
2. Press to highlight Volu me and press / to select a desired sound level.
Turning off the Power On/Off Ring Tone
To turn off the ring tone:
1. Repeat steps 1 above.
2. Press to highlight Power On/Off Ring Tone and press / to select Off.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or changing the sound
level will not affect the Power On/Off Ring Tone.
36
Using the projector
Selecting the aspect ratio
The "aspect ratio" is the ratio of the image width to the image height. Digital TV is usually in 16:9 ratio,
which is the default for this projector, and most analog TV signals and DVDs are in 4:3 ratio.
With the advent of digital signal processing, digital display devices like this projector can dynamically
stretch and scale the image output to a different aspect than that of the image input source. Images can
be stretched in a linear manner so the whole of the image is stretched equally, or non-linearly, which
distorts the image.
To change the projected picture ratio (no matter what aspect the source is):
• Using the remote control
1. Press ASPECT to show the current setting.
2. Press ASPECT repeatedly to select an aspect ratio to suit the format of the video signal and your
display requirements.
• Using the OSD menu
1. Press MENU/EXIT and then press / until the Display menu is highlighted.
2. Press to highlight Aspect Ratio.
3. Press / to select an aspect ratio to suit the format of the video signal and your display
requirements.
About the aspect ratio
1. Auto: Scales an image proportionally to fit the projector's native
resolution in its horizontal or vertical width. This is suitable for the
incoming image which is neither in 4:3 nor 16:9 and you want to make
most use of the screen without altering the image's aspect ratio.
2. Real: This setting displays the image in a one-to-one pixel mapping
without alteration or resize in the center of the projection. This is most
suitable for use with PC source inputs.
3. 4:3: Scales a picture so that it is displayed in the center of the screen
with a 4:3 aspect ratio. This is most suitable for 4:3 pictures like
computer monitors, standard definition TV and 4:3 aspect DVD
movies, as it displays them without aspect alteration.
4. Wide: Stretches the picture horizontally in a non-linear manner, that
is, the edges of the picture are stretched more than the center of the
picture to prevent distortion of the central part of the picture. This is
suitable for occasions where you want to stretch the width of a 4:3
aspect picture to the width of a 16:9 aspect screen. It does not alter the
height. Some widescreen movies have been produced with their width
squashed down to the width of a 4:3 aspect, and are best viewed when
restretched back to their original width using this setting.
5. Anamorphic: Scales an image so that it is displayed in the center of
the screen with a 16:9 aspect ratio. This setting stretches and resizes
linearly, except that it treats the vertical and horizontal dimensions
independently. It stretches the height of the source image until it
reaches the full projected height, and stretches the width of the source
image until it reaches the full projected width. This may alter the
projected aspect, depending upon the original aspect of the source
15:9 picture
4:3 picture
4:3 picture
4:3 picture
16:9 picture
37
Using the projector
image. Anamorphic is most suitable for images which are already in a 16:9 aspect, like high definition
TV, as it displays them without aspect alteration.
6. Letter Box: Scales a picture to fit the projector’s native resolution in
its horizontal width and resize the picture’s height to the 3/4 of the
projection width. This may produce a picture greater in height than
can be displayed, so part of the picture is lost (not displayed) along the
top and bottom edges of the projection. This is suitable for the display
of movies which are presented in letter box format (with black bars
on the top and bottom).
• The black portions are inactive areas and the white portions are active
areas.
• OSD menus can be displayed on those unused black areas.
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys
for navigating the picture.
• Using the OSD menu
1. Press MENU/EXIT and then press / until the Display menu is highlighted.
2. Press
to highlight Digital Zoom and press MODE/ENTER. The Zoom bar displays.
3. Press repeatedly to magnify the picture to a desired size.
4. To navigate the picture, press MODE/ENTER to switch to the panning mode and press the
directional arrows ( , , , ) on the projector or remote control to navigate the picture.
press AUTO to restore the picture to its original size. You can also press repeatedly until it is
restored to the original size.
The picture can only be navigated after it is magnified. You can further magnify the picture while searching for details.
Operating in a high altitude environment
We recommend that you activate High Altitude Mode when your environment is higher than 1500
meters (around 4920 feet) above sea level, or whenever the projector will be used for extended periods
of time (>10 hours) without shutdown.
To activate High Altitude Mode:
1. Press MENU/EXIT and then press / until the System Setup : Advanced menu is highlighted.
2. Press to highlight High Altitude Mode.
3. Press / to select On. A confirmation message displays.
4. Highlight Yes and press MODE/ENTER.
Operation under High Altitude Mode may cause a higher decibel operating noise level because of
increased fan speed necessary to improve overall system cooling and performance.
If you use this projector under other extreme conditions excluding the above, it may display auto shut-
down symptoms, which is designed to protect your projector from over-heating. In cases like this, you
should switch to High Altitude Mode to solve these symptoms. However, this is not to state that this
projector can operate under any and all harsh or extreme conditions.
16:9 picture
Letter Box
format picture
38
Using the projector
Watching 3D content
Your BenQ projector supports playing three-dimensional (3D) content transferred through D-Sub,
Component, HDMI, Video, and S-Video. Yet you need the required compatible hardware accessories and
software to play 3D content on BenQ projector.
Connecting 3D video devices
• PlayStation games
i. Make sure you have updated your console to the latest software version in PlayStation 3.
ii. Insert the 3D game disc. Or you can download games via the PlayStation network.
iii. Launch the game and select Play in 3D in the in-game menu.
• Blu-ray 3D player
i. Make sure your player supports 3D Blu-ray Disc and that 3D output is activated.
ii. Play the 3D Blu-ray Disc.
• 3D TV (e.g. SKY 3D, DirecTV)
i. Contact your TV service provider to enable 3D channels on your channel package.
ii. Switch to the 3D channel.
• 3D Devices (e.g. 3D DV/DC)
Turn on the 3D device and project the 3D content.
To view the 3D video correctly, make sure Auto is selected in the Display > 3D > 3D Mode menu. If 3D
content still cannot be shown correctly, select the supported format in the Display > 3D > 3D Mode menu.
After you have connected the 3D video devices to the projector, make sure the power of BenQ 3D
glasses is on. Wear the BenQ 3D glasses, and then enjoy your 3D experience!
Using the 3D menus
1. Press the MENU/EXIT and go to the Display > 3D menu and press MODE/ENTER. Or you can
press the 3D button on the remote control. The 3D page displays.
2. Highlight 3D Mode and press MODE/ENTER. The 3D Mode page displays.
3. Press / to highlight the 3D format that you need and press MODE/ENTER.
The projector
automatically detects the format of the video when selecting Auto. If not, you need to base on the
3D format of the video to make an appropriate setting in the 3D Mode menu.
4. Press MENU/EXIT to go back to the 3D page.
5. Press / to highlight 3D Sync Invert and press / to select Invert to switch between the
image for the left eye and the right eye for the more natural viewing. You can also toggle this function
between Invert and Disable by pressing INVERT on the remote control.
• Use corrective glasses or other such methods to correct your eyesight if you suffer from myopia,
hyperopia, astigmatism, or have eyesight differences between the left and right eyes before putting on
the 3D Glasses to watch the 3D content.
• When the projector starts to project the 3D images, the image may seem misplaced, however, this is not
a product malfunction.
• Take appropriate breaks when watching 3D content.
• Stop watching 3D content if you feel fatigue or discomfort.
• Keep a distance from the screen of about three times the effective height of the screen when watching
3D content.
• Children and people with a history of oversensitivity to light, heart problems, or have any other existing
medical condition should be refrained from watching 3D content.
39
Using the projector
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do
not affect the projection settings, operation, or performance.
• Menu Display Time in the System Setup : Basic > Menu Settings menu sets the length of time
the OSD will remain active after your last key press. Use / to select a suitable time length.
• Menu Position in the System Setup : Basic > Menu Settings menu sets the OSD position in
five locations. Use / to select a preferred position.
• Language in the System Setup : Basic menu sets your familiar language for the On-Screen (OSD)
Menus. See "Using the menus" on page 26 for details.
• Splash Screen in the System Setup : Basic menu sets a preferred logo screen to be displayed
during projector start-up.
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings from being
changed accidentally (by children, for example). When Key Lock is on, no control keys on the projector
will operate except POWER and .
To lock the keys:
1. Press MENU/EXIT and then press / until the System Setup : Advanced menu is highlighted.
2. Press to highlight Key Lock, and press / to select On. A warning message appears. Select Yes
and press MODE/ENTER. The control keys lock.
To unlock the keys, press and hold on the projector for 3 seconds.
Turning the projector off
To turn the projector off, press POWER on the projector or
on the remote control and a warning message appears. Press
POWER again.
• The Power indicator light flashes orange and the fans run for
about two minutes to cool the lamp. The projector will not
respond to any commands until the cooling process is complete.
Once the cooling process finishes, a "Power Off Ring Tone"
will be heard.
To turn off the ring tone, see "Turning off the Power On/Off Ring Tone" on page 35 for details.
• Then, the Power indicator light is a steady orange once the cooling process has finished and fans stop.
• If the projector will not be used for an extended period, unplug the power cable from the power
outlet.
• To protect the lamp, the projector will not respond to any commands during the cooling process.
Actual lamp life may vary due to different environmental conditions and usage.
40
Using the projector
On-Screen Display (OSD) menus
On-Screen Display (OSD) structure
Please note that the on-screen display (OSD) menus vary according to the signal type selected.
Main menu Sub-menu Options
Picture
Preset Mode Cinema/Dynamic/Standard/User 1/User 2/User 3/3D/ISF Night/ISF Day
User Mode Management
Brightness 0–100
Contrast 0–100
Color 0–100
Tint 0–100
Sharpness 0–15
Color Temperature Normal/Cool/Lamp Native/Warm
Lamp Power Normal/Economic/SmartEco
Advanced...
Black Level 0 IRE/7.5 IRE
Clarity Control Noise Reduction
Color Temperature Fine
Tuning
Red Gain/Green Gain/Blue Gain/Red Offset/
Green Offset/Blue Offset
Gamma Selection 1.6/1.8/2.0/2.2/2.4/2.5/2.6/2.8/BenQ
Brilliant Color On/Off
Color Management Primary Color/Hue/Gain/Saturation
Reset Picture Settings
Audio Setup
Mute On/Off
Volume 0-10
Power On/Off Ring Tone On/Off
Display
Aspect Ratio Auto/Real/4:3/Wide/Anamorphic//Letter Box
Keystone
Position
Overscan Adjustment 0/1/2/3
PC & Component
YPbPr Tuning
H.Size
Phase
Auto
Digital Zoom
Film Mode On/Off
3D Comb Filter On/Off
3D
3D Mode
Auto/Off/Frame Sequential/Frame Packing/
Top-Bottom/Side-by-Side
3D Sync Invert Disable/Invert
41
Using the projector
Note that the menu items are available when the projector detects at least one valid signal. If there is no
equipment connected to the projector or no signal detected, limited menu items are accessible.
System Setup
: Basic
Language
Background Color Black/Blue/Purple
Splash Screen BenQ/Black/Blue
Projector Position Front/Front Ceiling/Rear/Rear Ceiling
Auto Off
Disable/5 min/10 min/15 min/20 min/25 min/
30 min
Sleep Timer
Disable/30 min/60 min/90 min/120 min/150
min/180 min
Menu Settings
Menu Display Time
5 sec/10 sec/15 sec/20 sec/25 sec/30 sec/
Always On
Menu Position
Center/Top-Left/Top-Right/Bottom-Left/
Bottom-Right
Blank Reminder Message On/Off
Input Source
HDMI 1/HDMI 2/Video/S-Video/Component/
PC
Source Rename
Auto Source Search On/Off
System Setup
: Advanced
Lamp Settings
Reset Lamp Timer
Equivalent Lamp Hour
HDMI Settings
HDMI Format Auto/PC Signal/Video Signal
CEC On/Off
Baud Rate
2400/4800/9600/14400/19200/38400/57600/
115200
Test Pattern
Closed Caption
Closed Caption Enable On/Off
Caption Version CC1/CC2/CC3/CC4
Quick Cooling On/Off
Auto Blank (for W1080ST) On/Off
High Altitude Mode On/Off
Password
Change Password
Power On Lock On/Off (inputs current password)
Key Lock
Reset All Settings
ISF (inputs password)
Information
Source
Preset Mode
Resolution
Color System
Equivalent Lamp Hour
3D Format
Firmware Version
42
Using the projector
Picture menu
Function Description
Preset Mode
Pre-defined picture modes are provided so you can optimize your projector
picture set-up to suit your program type. See "Selecting a preset mode" on
page 30 for details.
User Mode
Management
Selects a preset mode that most suits your need for the picture quality and
further fine-tune the picture based on the selections listed below. See "Setting
the User 1/User 2/User 3 mode" on page 30 for details.
Brightness
Adjusts the brightness of the picture. See "Adjusting Brightness" on page 31 for
details.
Contrast
Adjusts the degree of difference between dark and light in the picture. See
"Adjusting Contrast" on page 31 for details.
Color
Adjusts the color saturation level -- the amount of each color in a video
picture. See "Adjusting Color" on page 31 for details.
Tint
Adjusts the red and green color tones of the picture. See "Adjusting Tint" on
page 32 for details.
Sharpness
Adjusts the picture to make it look sharper or softer. See "Adjusting Sharpness"
on page 32 for details.
Color Temperature
There are several color temperature settings available. See "Selecting a color
temperature*" on page 32 for details.
Lamp Power
Selects the projector lamp power between Normal, Economic and
SmartEco modes.
Advanced...
Black Level
Sets the picture grayscale as 0 IRE or 7.5 IRE. See "Setting Black Level" on
page 33 for details.
Clarity Control
See "Controlling image clarity" on page 33 for details.
Color Temperature Fine Tuning
See "Setting a preferred color temperature" on page 33 for details.
Gamma Selection
See "Selecting a Gamma setting" on page 33 for details.
Brilliant Color
See "Adjusting Brilliant Color" on page 34 for details.
Color Management
See "Color Management" on page 34 for details.
Reset Picture Settings
Returns all settings in the Picture menus to the factory preset values. See
"Resetting the picture mode" on page 31 for details.
43
Using the projector
Audio Setup menu
Display menu
Function Description
Mute
See "Muting the sound" on page 35 for details.
Volume
See "Adjusting the sound level" on page 35 for details.
Power On/Off Ring
To n e
See "Turning off the Power On/Off Ring Tone" on page 35 for details.
Function Description
Aspect Ratio
There are several options to set the picture’s aspect ratio depending on your
input source. See "Selecting the aspect ratio" on page 36 for details.
Keystone
Corrects any keystoning of the picture. See "Correcting picture distortion" on
page 29 for details.
Position
Displays the position adjustment page. To move the projected picture, use the
directional arrow keys. The values shown on the lower position of the page
change with every key press you made until they reach their maximum or
minimum.
This function is only available when the PC signal is selected.
Overscan Adjustment
Conceals the poor picture quality in the four edges. You can also manually press
/ to decide how much to be concealed. Setting 0 means the picture is
100% displayed. The greater the value, the more portion of the picture is
concealed while the screen remains filled and geometrically accurate.
PC & Component
YPbPr Tuning
H.Size
Adjusts the horizontal width of the picture.
This function is only available when the Component or PC signal is
selected.
Phase
Adjusts the clock phase to reduce picture distortion.
This function is only available when the
Component or PC signal is selected.
Auto
Adjusts the phase, and frequency automatically
This function is only available when the PC signal is selected.
Digital Zoom
See "Magnifying and searching for details" on page 37 for details.
Film Mode
See "Setting Film Mode" on page 35 for details.
3D Comb Filter
See "Setting 3D Comb Filter" on page 35 for details.
44
Using the projector
System Setup : Basic menu
3D
3D Mode
This projector features a 3D function which enables you to enjoy the 3D
movies, videos, and sporting events in a more realistic way by presenting the
depth of the images. You need to wear a pair of 3D glasses to view the 3D
images.
When the 3D Mode function is enabled:
• The brightness level of the projected image will decrease.
• The Preset Mode cannot be adjusted.
• The Keystone can only be adjusted within limited degrees.
3D Sync Invert
When you 3D image is distorted, you can enable this function to switch
between the image for the left eye and the right eye for the more comfortable
3D viewing experience.
See "Watching 3D content" on page 38 for details.
Function Description
Language
Sets the language for the On-Screen Display (OSD) menus. See "Using the
menus" on page 26 for details.
Background Color
Selects background appearance when there is no signal.
Splash Screen
Allows you to select which logo screen will display during projector start-up.
You can choose BenQ logo screen, Blue screen or Black screen.
Projector Position
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See "Choosing a location" on page 13 for details.
Auto Off
Prevents unnecessary projection when no signal is detected for a long time. See
"Setting Auto Off" on page 48 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 3 hours.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Blank Reminder Message
Sets whether the blank reminder message is displayed by the projector while
the image is hidden.
Input Source
Selects an input source to be projected. See "Selecting an input source" on
page 25 for details.
Source Rename
Renames the source to your desired name. See "Selecting an input source" on
page 25 for details.
Auto Source Search
Sets whether the projector searches automatically for input sources. If the
source scan is On, the projector will scan for input sources until it acquires a
signal. If the function is not activated, the projector selects the last used input
source.
45
Using the projector
System Setup : Advanced menu
Function Description
Lamp Settings
Reset Lamp Timer
Once the lamp is renewed, select Reset to return the lamp timer to "0". See
"Resetting the lamp timer" on page 51 for details.
Equivalent Lamp Hour
Shows the lamp hour information. See "Getting to know the lamp hour" on
page 48 for details.
HDMI Settings
HDMI Format
Selects an input source type for the HDMI signal. You can also manually select
the source type. The different source types carry different standards for the
brightness level.
HDMI Format is only available when the HDMI signal is selected.
CEC
Enables or disables the CEC function. When you connect an HDMI CEC-
compatible device to your projector with an HDMI cable, turnig on the HDMI
CEC compatible device automatically turns on the projector, while turnig off
the projector automatically turns off the HDMI CEC compatible device.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you can
connect the projector using a suitable RS-232 cable and update or download
the projector’s firmware. This function is intended for qualified service
personnel.
Te s t P a t t e r n
Press ENTER to display the grid test pattern. It helps you adjust the image size
and focus and check that the projected image is free of distortion.
Closed Caption
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and sound
effects of TV programs and videos that are closed captioned (usually
marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select CC1,
CC2, CC3, or CC4 (CC1 displays captions in the primary language in your
area).
Quick Cooling
Enables or disables the Quick Cooling function. Selecting On enables
the function and projector cooling time will be shortened from a
normal 90-second duration to approximately 15 seconds.
Auto Blank (for
W1080ST)
Enables or disables the Auto Blank function. Selecting On will hide the screen
picture when any objects appear within 10 cm in front of the projection lens.
High Altitude Mode
A mode for operation in areas like high altitude or high temperature. See
"Operating in a high altitude environment" on page 37 for details.
Password
Change Password
You will be asked to enter the current password before changing to a new one.
See "Utilizing the password function" on page 27 for details.
Power On Lock
Limits use of the projector to only those who know the correct password. See
"Utilizing the password function" on page 27 for details.
Key Lock
See "Locking control keys" on page 39 for details.
46
Using the projector
Information menu
This menu shows you the current operating status of the projector.
Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments
are not shown on the screen.
Reset All Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Language, Projector
Position, High Altitude Mode, Password, Key Lock, and ISF.
ISF
The ISF calibration menu is password protected and only accessible by
authorized ISF calibrators. The ISF (Imaging Science Foundation) has developed
carefully crafted, industry-recognized standards for optimal video performance
and has implemented a training program for technicians and installers to use
these standards to obtain optimal picture quality from BenQ video display
devices. Accordingly, we recommend that setup and calibration be performed
by an ISF certified installation technician.
For more information, please go to www.imagingscience.com or
contact the place you purchased the projector.
Function Description
Source
Shows the current signal source.
Preset Mode
Shows the selected mode in the Picture > Preset Mode menu.
Resolution
Shows the native resolution of the input source.
Color System
Shows input system format: NTSC, PAL, SECAM, YUV, or RGB.
Equivalent Lamp
Hour
Shows the total lamp time used.
3D Format
Shows the current 3D mode.
3D Format is only available when 3D Mode is enabled.
Firmware Version
Shows the firmware version of your projector.
47
Using the projector
Additional information
Care of the projector
Your projector needs little maintenance. The only thing you have to do on a regular basis is keep the lens
clean. Never remove any parts of the projector except the lamp. Contact your dealer or local customer
service center if the projector fails to operate as expected.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface. Before you attempt to clean the lens,
turn the projector off, unplug the power cable, and leave it several minutes to cool completely.
1. Use a canister of compressed air to remove dust. (Available from building hardware or photographic
suppliers.)
2. If there is stubborn dirt or smudge marks, use a proper photographic lens brush or moisten a clean
soft lens cloth with lens cleaner to gently wipe the lens surface.
3. Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as
alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with
rubber or vinyl materials may result in damage to the projector surface and cabinet material.
Never touch the lens with your finger or rub the lens with abrasive materials. Even paper towels can damage
the lens coating. Only ever use a proper photographic lens brush, cloth, and cleaning solution. Do not
attempt to clean the lens while the projector is switched on or is still hot from previous use.
Cleaning the projector case
Before you attempt to clean the case, turn the projector off, unplug the power cable, and leave it several
minutes to cool completely.
1. To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.
2. To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then
wipe the case.
Never use wax, alcohol, benzene, thinner or other chemical detergents. These can damage the case.
Storing the projector
If you need to store the projector for an extended time, please:
1. Make sure the temperature and humidity of the storage area are within the recommended range for
the projector. Please refer to the Spec. page in this manual or consult your dealer about the range.
2. Retract the adjuster feet.
3. Remove the batteries from the remote control.
4. Pack the projector in its original packing or equivalent.
Transporting the projector
It is recommended that you ship the projector with its original packing or equivalent.
48
Using the projector
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by
the built-in timer.
See "Setting Lamp Power as Economic or SmartEco" below for more information on Economic mode.
To obtain the lamp hour information:
1. Press MENU/EXIT and then press / until the System Setup : Advanced menu is highlighted.
2. Press to highlight Lamp Settings and press MODE/ENTER. The Lamp Settings page displays.
3. The lamp hour information is shown in the row of Equivalent Lamp Hour.
4. To leave the menu, press MENU/EXIT.
Extending lamp life
The projection lamp is a consumable item. To keep the lamp life as long as possible, you can do the
following settings via the OSD menu.
• Setting Lamp Power as Economic or SmartEco
Using Economic mode reduces system noise and power consumption by 30%. Using SmartEco mode
reduces system noise and lamp power consumption by up to 70%. If the Economic or SmartEco mode
is selected, the light output will be reduced and result in darker projected pictures
Setting the projector in Economic or SmartEco mode also extends the lamp life. To set Economic or
SmartEco mode, go to the System Setup : Advanced > Lamp Settings > Lamp Power menu,
and press MODE/ENTER. The
Lamp Power page displays. Then press / repeatedly until your
desired mode is selected and press MODE/ENTER
• Setting Auto Off
This function allows the projector to turn off automatically if no input source is detected after a set
period of time.
To s e t Auto Off, go to the System Setup : Basic > Auto Off menu and press / to select a time
period. The time period can be set from 5 to 30 minutes in 5-minute increments. If the preset time
lengths are not suitable for your presentation, select Disable. The projector will not automatically shut
down in a certain time period.
Lamp mode Description
Normal
100% lamp brightness
Economic
Saves 30% lamp power consumption
SmartEco
Saves up to 70% lamp power consumption depending on the content brightness level
49
Using the projector
Timing of replacing the lamp
When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp,
please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector
and in some instances the lamp may explode. Go to http://lamp.BenQ.com for a replacement lamp.
The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn
the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after
turning the power back on, please contact your dealer. See "Indicators" on page 52 for details.
The following Lamp warning displays will remind you to change the lamp.
"XXXX" shown in the above messages are numbers that vary depending on different models.
Status Message
Install a new lamp for optimal performance. If the projector is
normally run with Economic selected (see "Getting to know the
lamp hour" on page 48), you may continue to operate the projector
until the next hour lamp warning appears.
Press MODE/ENTER to dismiss the message.
It is strongly recommended that you replace the lamp at this stage.
The lamp is a consumable item. The lamp brightness diminishes with
use. This is normal lamp behavior. You can replace the lamp
whenever you notice that the brightness level has significantly
diminished.
Press MODE/ENTER to dismiss the message.
The lamp MUST be replaced before the projector will operate
normally.
Press MODE/ENTER to dismiss the message.
OK
NOTICE: Order replacement lamp
Lamp > XXXX hrs
Order a new lamp at
lamp.benq.com
WARNING
OK
NOTICE: Replace lamp soon
Lamp > XXXX hrs
Order a new lamp at
lamp.benq.com
WARNING
NOTICE: Replace lamp now
Lamp > XXXX hrs
Lamp-usage time exceeded
Replace lamp (refer to User’s Manual)
then reset lamp timer.
Order a new lamp at
lamp.benq.com
OK
WARNING
50
Using the projector
Replacing the lamp
• To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before
changing the lamp.
• To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the
lamp.
• To reduce the risk of injuries to fingers and damage to internal components, use caution when removing
lamp glass that has shattered into sharp pieces.
• To reduce the risk of injuries to fingers and/or compromising image quality by touching the lens, do not
touch the empty lamp compartment when the lamp is removed.
• This lamp contains mercury. Consult your local hazardous waste regulations to dispose of this lamp in a
proper manner.
• To assure optimal performance from the projector, it is recommended that you purchase a qualified
projector lamp for lamp replacement.
• If lamp replacement is performed while the projector is suspended upside-down from the ceiling, make
sure that no one is underneath the lamp socket to avoid any possible injury or damage to the human eyes
caused by fractured lamp.
• Ensure good ventilation when handling broken lamps. We recommend that you use respirators, safety
glasses, goggles or face shield and wear protective clothing such as gloves.
1. Turn the power off and disconnect the projector from the power outlet. If the lamp is hot, avoid
burns by waiting for approximately 45 minutes until the lamp has cooled.
2. Loosen the screw that secures the lamp cover on the side of
the projector until the lamp cover loosens.
3. Remove the lamp cover from the projector.
• Do not turn the power on with the lamp cover removed.
• Do not insert your fingers between the lamp and the projector.
The sharp edges inside the projector may cause injuries.
4. Loosen the screw that secures the lamp.
5. Lift the handle so that it stands up.
2
1
51
Using the projector
Resetting the lamp timer
Do not reset the lamp timer if the lamp has not been replaced as this could cause damage.
13. After the start-up logo, press MENU/EXIT and then press / until the System Setup :
Advanced menu is highlighted.
14. Press to highlight Lamp Settings and press MODE/ENTER. The Lamp Settings page displays.
15. Highlight Reset Lamp Timer and press MODE/ENTER. A warning message displays asking if you
want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp time will be
reset to "0".
6. Use the handle to slowly pull the lamp out of the projector.
• Pulling it too quickly may cause the lamp to break and scatter
broken glass in the projector.
• Do not place the lamp in locations where water might splash on
it, children can reach it, or near flammable materials.
• Do not insert your hands into the projector after the lamp is
removed. If you touch the optical components inside, it could
cause color unevenness and distortion of the projected images.
7. As shown in the figure, lower the new lamp.
8. Tighten the screw that secures the lamp.
9. Ensure the handle is fully laid flat and locked in place.
• Loose screw may cause a bad connection, which could result in
malfunction.
• Do not over tighten the screw.
10. Replace the lamp cover on the projector.
11. Tighten the screw that secures the lamp cover.
• Loose screw may cause a bad connection, which could result in malfunction.
• Do not over tighten the screw.
12. Connect the power and restart the projector.
1
2
52
Using the projector
Indicators
There are three indicators which show the status of the projector. Check the following for information
about the indicator lights. If there is anything wrong, turn the projector off and contact your dealer.
When the projector is in a normal state
When the projector is in an abnormal state
Power Te m p Lamp Status & Description
Orange Off Off
Stand-by mode
Green
Flashing
Off Off
Powering up
Green Off Off
Normal operation
Orange
Flashing
Off Off
• The projector needs 90 seconds to cool down as it was
abnormally shut down without the normal cooling down
process.
• The projector needs to cool for 90 seconds after the power
is turned off.
Power Te m p Lamp Status & Description
Off Off Red
• The lamp has been damaged. Please contact your local BenQ
customer center for purchasing a new lamp.
Off Off
Red
Flashing
• The lamp is not properly attached.
• The lamp has been damaged. Please contact your local BenQ
customer center for purchasing a new lamp.
Red Red Off
The fans are not working.
The projector has shut down
automatically. If you try to re-
start the projector, it will shut
down again. Please contact your
dealer for assistance.
Red
Red
Flashing
Off
Red Green Off
Red
Green
Flashing
Off
Green Red Off
The internal temperature is too high.
• The intake ventilation or the exhaust ventilation is blocked.
• The projector may be in a poorly ventilated location.
• The ambient temperature may be too high.
53
Using the projector
Troubleshooting
Problem Cause Remedy
The projector does
There is no power from the power
cable.
Plug the power cable into the AC inlet on the
rear of the projector, and plug the power
cable into to the power outlet. If the power
outlet has a switch, make sure that it is
switched on. (See page 24.)
Attempting to turn the projector on
again during the cooling process.
Wait until the cooling down process has
completed.
The lamp cover is not securely
attached.
Correctly attach the lamp cover. (See page
50.)
No picture.
The video source is not turned on or
connected correctly.
Turn the video source on and check that the
signal cable is connected correctly. (See page
21.)
The projector is not correctly
connected to the input source device.
Check the connection. (See page 21.)
The input source has not been
correctly selected.
Select the correct input source with the
Source keys on the remote control or
SOURCE on the projector. (See page 25.)
Image is unstable.
The connection cables are not
securely connected to the projector
or the signal source.
Correctly connect the cables to the
appropriate terminals. (See page 21.)
Picture is blurred.
The projection lens is not correctly
focused.
Adjust the focus of the lens using the focus
ring. (See page 25.)
The projector and the screen are not
aligned properly.
Adjust the projection angle and direction as
well as the height of this projector if
necessary. (See page 29.)
Remote control does
not work correctly.
The batteries are out of power.
Replace both of the batteries with new ones.
(See page 7.)
There is an obstacle between the
remote control and the projector.
Remove the obstacle. (See page 7.)
You are too far away from the
projector.
Stand within 8 meters (26.2 feet) of the
projector. (See page 7.)
3D content does not
not display correctly
The 3D glasses are out of battery. Recharge the 3D glasses.
The settings in the 3D menu are not
set correctly.
Correctly set the settings in the 3D menu.
(See page 38.)
Your Blu-ray Disc is not in 3D
format.
Use a 3D Blu-ray Disc and try again.
The input source has not been
correctly selected.
Select the correct source with the Source
keys on the remote control or SOURCE on
the projector. (See page 25.)
54
Using the projector
Specifications
All specifications are subject to change without notice.
Optical
Resolution
1920 (H) x 1080 (V)
Display system
Single-chip DLP
TM
system
Lens F/Number
(W1070)
F = 2.59 to 2.87, f = 16.88 to 21.88 mm
(W1080ST)
F = 2.6 to 2.78, f = 10.2 to 12.24 mm
Lamp
240 W lamp
Electrical
Power supply
AC100–240V, 3.4 A, 50-60 Hz (Automatic)
Power consumption
375 W (Max); < 0.5 W (Standby)
Mechanical
Weight
(W1070)
2.75 Kg (6.06 lbs)
(W1080ST)
2.85 Kg (6.28 lbs)
Output terminals
Speaker
(Stereo) 10 watt x 1
Audio signal output
PC audio jack x 1
Control
RS-232 serial control
9 pin x 1
IR receiver x 2
Mini B type USB x 1
12VDC (Max. 0.5 A) x 1
Input terminals
Computer input
RGB input
D-Sub 15-pin (female) x 1
Video signal input
S-VIDEO
Mini DIN 4-pin port x 1
VIDEO
RCA jack x 1
SD/HDTV signal input
Analog - Component RCA jack x 3
(through RGB input)
Digital - HDMI x 2
Audio signal input
Audio in
RCA audio jack (L/R) x 2
PC audio jack x 1
Environmental Requirements
Operating temperature
0°C–40°C at sea level
Operating relative humidity
10%–90% (without condensation)
Operating altitude
0–1499 m at 0°C–35°C
1500–3000 m at 0°C–30°C (with
High Altitude Mode on)
55
Using the projector
Dimensions
311.87 mm x 244.12 mm x 104 mm (W x D x H)
Ceiling mount installation
Unit: mm
244.12
311.87
104
625.95
577.7
537.9
95.33
163.12
244.12
102.97
43.55
311.95
137
160
46.21 115
80
Ceiling mount screws:
M4 (Max L = 25 mm;
Min L= 20 mm)
Unit: mm
56
Using the projector
Timing chart
Supported timing for PC input
Format Resolution
Refresh rate
(Hz)
H. Frequency
(KHz)
Pixel
Frequency
(MHz)
720 x 400 720 x 400_70 70.087 31.469 28.3221
640 x 480
VGA_60* 59.940 31.469 25.175
VGA_72 72.809 37.861 31.500
VGA_75 75.000 37.500 31.500
VGA_85 85.008 43.269 36.000
800 x 600
SVGA_60* 60.317 37.879 40.000
SVGA_72 72.188 48.077 50.000
SVGA_75 75.000 46.875 49.500
SVGA_85 85.061 53.674 56.250
SVGA_120**
(Reduce Blanking)
119.854 77.425 83.000
1024 x 768
XGA_60* 60.004 48.363 65.000
XGA_70 70.069 56.476 75.000
XGA_75 75.029 60.023 78.750
XGA_85 84.997 68.667 94.500
XGA_120**
(Reduce Blanking)
119.989 97.551 115.500
1152 x 864 1152 x 864_75 75.00 67.500 108.000
1024 x 576
BenQ Notebook
Timing
60.0 35.820 46.966
1024 x 600
BenQ Notebook
Timing
64.995 41.467 51.419
1280 x 720 1280 x 720_60* 60 45.000 74.250
1280 x 768 1280 x 768_60* 59.870 47.776 79.5
1280 x 800
WXGA_60* 59.810 49.702 83.500
WXGA_75 74.934 62.795 106.500
WXGA_85 84.880 71.554 122.500
WXGA_120**
(Reduce Blanking)
119.909 101.563 146.25
57
Using the projector
• *Supported timing for 3D signal with Frame Sequential, Top-Bottom and Side-by-Side format.
**Supported timing for 3D signal with Frame Sequential format.
***Supported timing for 3D signal with Top-Bottom and Side-by-Side format.
• The timings showing above may not be supported due to EDID file and VGA graphic card limitations. It is
possible that some timings cannot be chosen.
1280 x 1024
SXGA_60*** 60.020 63.981 108.000
SXGA_75 75.025 79.976 135.000
SXGA_85 85.024 91.146 157.500
1280 x 960
1280 x 960_60*** 60.000 60.000 108
1280 x 960_85 85.002 85.938 148.500
1360 x 768 1360 x 768_60*** 60.015 47.712 85.500
1440 x 900 WXGA+_60*** 59.887 55.935 106.500
1400 x 1050 SXGA+_60*** 59.978 65.317 121.750
1600 x 1200 UXGA*** 60.000 75.000 162.000
1680 x 1050 1680 x 1050_60*** 59.954 65.290 146.250
640 x 480@67Hz MAC13 66.667 35.000 30.240
832 x 624@75Hz MAC16 74.546 49.722 57.280
1024 x 768@75Hz MAC19 74.93 60.241 80.000
1152 x 870@75Hz MAC21 75.06 68.68 100.00
58
Using the projector
Supported timing for HDMI (HDCP) input
Format Resolution
Refresh rate
(Hz)
H. Frequency
(KHz)
Pixel
Frequency
(MHz)
640 x 480
VGA_60* 59.940 31.469 25.175
VGA_72 72.809 37.861 31.500
VGA_75 75.000 37.500 31.500
VGA_85 85.008 43.269 36.000
720 x 400 720 x 400_70 70.087 31.469 28.3221
800 x 600
SVGA_60 60.317 37.879 40.000
SVGA_72 72.188 48.077 50.000
SVGA_75 75.000 46.875 49.500
SVGA_85 85.061 53.674 56.250
SVGA_120**
(Reduce Blanking)
119.854 77.425 83.000
1024 x 768
XGA_60* 60.004 48.363 65.000
XGA_70 70.069 56.476 75.000
XGA_75 75.029 60.023 78.750
XGA_85 84.997 68.667 94.500
XGA_120**
(Reduce Blanking)
119.989 97.551 115.500
1152 x 864 1152 x 864_75 75.00 67.500 108.000
1024 x 576
BenQ Notebook
Timing
60.00 35.820 46.996
1024 x 600
BenQ Notebook
Timing
64.995 41.467 51.419
1280 x 720 1280 x 720_60* 60 45.000 74.250
1280 x 768 1280 x 768_60* 59.870 47.776 79.5
1280 x 800
WXGA_60* 59.810 49.702 83.500
WXGA_75 74.934 62.795 106.500
WXGA_85 84.880 71.554 122.500
WXGA_120**
(Reduce Blanking)
119.909 101.563 146.25
59
Using the projector
• *Supported timing for 3D signal with Frame Sequential, Top-Bottom and Side-by-Side format.
**Supported timing for 3D signal with Frame Sequential format.
***Supported timing for 3D signal with Top-Bottom and Side-by-Side format.
• The timings showing above may not be supported due to EDID file and VGA graphic card limitations. It is
possible that some timings cannot be chosen.
*Supported timing for 3D signal with Frame Packing and Top-Bottom format.
**Supported timing for 3D signal with Frame Sequential format.
***Supported timing for 3D signal with Side-by-Side format.
1280 x 1024
SXGA_60*** 60.020 63.981 108.000
SXGA_75 75.025 79.976 135.000
SXGA_85 85.024 91.146 157.500
1280 x 960
1280 x 960_60*** 60.000 60.000 108
1280 x 960_85 85.002 85.938 148.500
1360 x 768 1360 x 768_60*** 60.015 47.712 85.500
1440 x 900 WXGA+_60*** 59.887 55.935 106.500
1400 x 1050 SXGA+_60*** 59.978 65.317 121.750
1600 x 1200 UXGA*** 60.000 75.000 162.000
1680 x1050 1680 x 105_60*** 59.954 65.290 146.250
640x480@67Hz MAC13 66.667 35.000 30.240
832x624@75Hz MAC16 74.546 49.722 57.280
1024x768@75Hz MAC19 75.020 60.241 80.000
1152x870@75Hz MAC21 75.06 68.68 100.00
Format Resolution Refresh rate (Hz) H. Freq. (KHz) Pixel Freq. (MHz) Aspect
480i** 720 (1440) x 480 59.94 15.73 27 16:9
480p 720 x 480 59.94 31.47 27 16:9
576i 720 (1440) x 576 50 15.63 27 16:9
576p 720 x 576 50 31.25 27 16:9
720/50p* 1280 x 720 50 37.5 74.25 16:9
720/60p* 1280 x 720 60 45.00 74.25 16:9
1080/24P* 1920 x 1080 24 27 74.25 16:9
1080/25P 1920 x 1080 25 28.13 74.25 16:9
1080/30P 1920 x 1080 30 33.75 74.25 16:9
1080/50i*** 1920 x 1080 50 28.13 74.25 16:9
1080/60i*** 1920 x 1080 60 33.75 74.25 16:9
1080/50P 1920 x 1080 50 56.25 148.5 16:9
1080/60P 1920 x 1080 60 67.5 148.5 16:9
60
Using the projector
Supported timing for EDTV and HDTV (via Component inputs)
*Supported timing for 3D signal with Frame Sequential format.
Supported timing for Video and S-Video inputs
*Supported timing for 3D signal with Frame Sequential format.
Format Resolution Refresh rate (Hz) H. Freq. (KHz) Pixel Freq. (MHz)
480i* 720 x 480 59.94 15.73 13.5
480p 720 x 480 59.94 31.47 27
576i 720 x 576 50 15.63 13.5
576p 720 x 576 50 31.25 27
720/50p 1280 x 720 50 37.5 74.25
720/60p 1280 x 720 60 45.00 74.25
1080/50i 1920 x 1080 50 28.13 74.25
1080/60i 1920 x 1080 60 33.75 74.25
1080/24P 1920 x 1080 24 27 74.25
1080/25P 1920 x 1080 25 28.13 74.25
1080/30P 1920 x 1080 30 33.75 74.25
1080/50P 1920 x 1080 50 56.25 148.5
1080/60P 1920 x 1080 60 67.5 148.5
Format Resolution
Refresh rate
(Hz)
H. Freq. (KHz)
Pixel Freq.
(MHz)
NTSC* - 60 15.73 3.58
PAL - 50 15.63 4.43
SECAM - 50 15.63 4.25/4.41
PAL-M - 60 15.73 3.58
PAL-N - 50 15.63 3.58
PAL-60 - 60 15.73 4.43
NTSC4.43* - 60 15.73 4.43
61
Using the projector
Warranty and Copyright information
Warranty
BenQ warrants this product against any defects in material and workmanship, under normal usage and
storage.
Proof of purchase date will be required with any warranty claim. In the event this product is found to be
defective within the warranty period, BenQ’s only obligation and your exclusive remedy shall be
replacement of any defective parts (labor included). To obtain warranty service, immediately notify the
dealer from which you purchased the product of any defects.
Important: The above warranty shall be void if the customer fails to operate the product in accordance
with BenQ’s written instructions, especially the ambient humidity must be in-between 10% and 90%,
temperature in-between 0°C and 35°C, altitude lower than 3000 meters, and avoiding to operate the
projector in a dusty environment. This warranty gives you specific legal rights, and you may have other
rights which vary from country to country.
For other information, please visit www.BenQ.com.
Copyright
Copyright © 2013 by BenQ Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of BenQ Corporation.
All trademarks and registered trademarks are the property of their respective owners.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to
the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular
purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes
from time to time in the contents hereof without obligation of BenQ Corporation to notify any person of
such revision or changes.
